Working principle
LW drilling mud decanter centrifuges are designed specifically to remove unwanted solids and fine particles from virtually all kinds of used frilling mud, including those based on water/synthetics and conventional oil-based drilling fluids.
Drilling muds are based on water, oil pr polymer with a composition of various additives such as flocculents, surfactants, detergents and more. By means of modern drilling mud system includes decanter centrifuge, cutting dryers, shakers, etc, everything brought into the mud by the frilling process will be separated. The clarified mud will be returned to the drilling rig
Separation takes place in the horizontal bowl equipped with a scroll conveyor. The drilling mud is feed into the bowl through a stationary inlet tube and is smoothly accelerated in the accelerate chamber. Centrifugal forces cause instant sedimentation of the solids on the wall of bowl. The conveyor rotates in the same direction as the bowl, but a different speed, thus moving the solids towards the conical end of the bowl.
Design Feature Vertical base design and symmetrical arrangement of motor and bowl assembly, that ensures stable operation and less vibration.
Main parts such as the bowl and conveyor are made of corrosion-resistant stainless steel or duplex steel, offering high maximum bowl speed and high centrifugal force.
The basic principle is the drum and the spiral feeder rotate in the same direction but with a certain speed difference: The material is led into the feeding spiral inner cylinder via the feeding pipe and after speeding up, enters the drum: Under the action of the centrifuge force field, the relatively heavier solid-phase material deposits on the drum wall forming the residue layer: The solid-phase residue is continuously pushed by the spiral feeder to the conic end of the drum and after dehydration in the drying area, is discharged under full-speed running.
Decanter design:
Type: 3- phase separation
Materials: use high-quality stainless steel for all product wetted areas.
Bearings: SKF brand. A special selection and arrangement of bearings provides for long life and exceptional reliability.
Wear protection: welded hard facing or spray coating, ceramic technology.
Application area
1.Optimum dewatering of industrial and municipal sludge
2.Optimized thickening of surplus sludge
3. Partial dewatering of sludge for use in agriculture
4. Treatment of industrial waste water
5.Drinking water treatment
Typical uses
1.Chemical: Polyethylene, polystyrene, fumaric acid, urea, ammonium sulfate, potassium nitrate, polyamide, caprolactam, sodium carbonate, compound fertilizer, sodium chloride, medicine, sodium sulfite, vitriol, polyvinyl chloride, ferrite , polyethylene glycol, activated carbon, various resin and so on.
2.FOOD: Citric acid, tartaric acid, sodium glutamate, an amino acid, salt, sugar, xylitol, corn fiber, saccharin, flax, coffee and so on.
3.Mining: Iron sulfate, copper sulfate, nickel sulfate, thiocyanate, amine and so on.
Centrifugal Separator
Decanter Centrifuge
Disc stack centrifuge
Tubular Centrifuge
In the spirit of responsibility for the customer, our company keeps tight follow-up with product quality, visits our customers periodically, adopts the suggestions from our customers, and offers the all-day, all-directional and top-grade market services.
The technical and after-sale services are listed as follows:
1. Provide free technical training, guidance and information of accessories.
2. Our technical staff could instruct our customers on the installation of connector and accessories on site, and deal with technical and quality issues.
3. We guarantee more than 10 years’ service life of our products with 2 years’ warranty and life maintenance.
4. 24-hour hot line: 86-13674188053. Once receive the customer complaints, we will response within 24 hours.
5. Free maintenance and replacement will be provided if defects result from quality failure of our product.
6. Our company will provide technical services by phone, fax, e-mail, etc., please refer to the contact details.
7. Our company will implement the contract strictly; deliver the products to location specified by our customers for free in accordance with the mode of transportation.
8. Our company will provide perfect after-sale services and technical support. Hot line: 86-13674188053
Contact person: Grace
Once receive the calling of complaints, we will respond to it within 12 hours at working time and provide solution within 48 hours. If necessary, our company will send technical staff there and provide on-site solution.