STD-SC® Series Glue Dosing Screw Pump
The STD -SC series of metering and filling screw pump is designed for glue with high viscosity and chemical, pharmaceutical and other industries designed, can accurately convey and measure a synthetic pump, its structure is fully suitable for smooth and low pulsating transmission medium, corrosive and anti-corrosion chemicals, chemicals can be very well measured.
The Standard company SC series metering and filling screw pump contains less parts, is very easy to maintain and repair, and the price is also affordable
Features of the S T D-SC Series dosing screw pump
1. It is generally applicable to a variety of media (even acidic and alkaline media
2. Continuous low pulsation transmission, not affected by pressure and viscosity
3. The conveying capacity is proportional to the rotational speed, and can realize high-precision metering and conveying in the whole speed range.
4. Maintenance-free and easy maintenance
5. Compact structure and high efficiency
Wide applications of STD-SC Pump
The S T D-SC dosing screw Pump is used primarily for substances with the following properties
1) Products with or without solid particles
2) Low to medium viscosity (up to 20,000 mPas)
3)Thixotropic and dilatant
4) Aggressive (pH 0-14)
5) Lubricated or non-lubricated
such as
natural and artificial polymers, anionic and cationic polyelectrolytes, iron and aluminum salt solutions (e.g. ferric chloride), lime water, water and wastewater, suspensions, organic and inorganic acids and bases, etc
Performance
1) Flow rates from 0.5cc/rev to 200cc /rev
2) Pressures up to 48 bar
3) Operating temperature: 0ºC-120ºC
4) High precision measurement: tolerance +/-1%
Structure of Glue Screw Pump Series Product
1. Rotor: Can assembleadvanced chrome plated steel rotor for conveying abrasive or non- lubricating medium
2. Stator: Tube vulcanization, both ends sealed, using a variety of rubber, plastic and metal materials.
3. Mechanical seal cavity: The seamless mechanical seal is located in the fluid medium to ensure the permanent flushing of the medium to prevent the deposition of solid materials.
4. Suctionand discharge: the suction chamber and the discharge body are made of material SS304 and SS316Ll, and the universal flange makes the installation and disassemblyof the equipment make the pump very easy, the suction size is 1', discharge size is 3/4 ', which can be customize.
5. Drive device SEWgear motor: the STD pump standard-equipped gear motor is Gearmany brand SEW or NORD, you also can choose other brands.
The maintenance of vulnerable parts
1. Rotor and stator
The wear rate of the two components is related to many factors, such as the wear characteristics, rotational speed and pressure of the pumping material. When the pump performance is reduced to meet the requirements, the stator and rotor should be replaced with a component or two simultaneous replacement.
2. Drive Shaft
The wear rate of the filler contact surface depends on many factors, such as the abrasion and rotational speed of the medium. Constant maintenance of filler can maximize the service life of the pump shaft. When shaft seals fail, the shafts and fillers need to be replaced at the same time.
3. Connecting rod Assembly
Regular maintenance and lubrication can maximize the service life of the connecting parts. When the parts appear obvious wear and tear, should replace the connecting parts connecting the component, if necessary, can replace the whole shaft
The advantage of STD
The company develops and manufactures high-precision, high-quality screw pumps for a wide range of applications. Our advantage is detailed patented technology and production process control process, in order to achieve the highest quality standards, we have strict control and inspection of each step
S T D universal parts overview
The supply capacity of STD
The company has an STD brand and spare parts for other major brand screw pumps in the world (Netzsch, Seepex,Viscotec, Mono, etc.,) which will largely save the customer's time while the customer does not have to hold a lot of inventory. For the spare parts we have in stock, we can dispatch quickly to minimize customer interruption or production downtime.
Our intimate service and highly competitive pricingis the source of trust and value when customers purchase spare parts.
WE CAN PROVIDE THE UNIVERSAL SPARE PARTS OF NETZSCH BRAND
WE CAN PROVIDE THE UNIVERSAL SPARE PARTS OF SEEPEX BRAND
WE CAN PROVIDE THE UNIVERSAL SPARE PARTS OF MONO BRAND
CERTIFICATION
1)What products does S T D offer ?
STD offers screw pump, Screw pump accessories, and the global solution of the fluid system product.
The product range summary of STD Progressive cavity pumps for conveying and metering low to highly viscous media with or without solids Macerators for macerating solid and fibrous components in the medium Control systems for monitoring, regulating and controlling processes
Services: consulting, commissioning, maintenance, NETZSCH ,SEEPEX, and MONO Universal Spare parts, repairs and various service contracts
2)Does S T D supply custom-made pumps ?
Yes, this is our specialty, we customize different design and material combinations for each application's modular system. This means that we develop the best technology and the most economical solution for your needs.
3)Can S T D spare parts be ordered online?
Yes, S T D screw pumps and spare parts as well as other brands (NETZSCH,SEEPEX.MONO) Universal accessories can be ordered online. For order please contact us.
4)How fast can my S T D pump be delivered?
Normally, standard pumps are delivered in 4 to 6 weeks. In urgent cases, delivery times between 2 to 5 days may be possible. Please contact us .Telephone: 0086 -189 4242 4342
5)Packing;Transport
1) Standard export packing: We will pack pump and accessories in wooden boxes, put into container. shipment by sea and air. .
2) The marks on the packing box are executed according to the international standard
3) Please check the packaging and integrity of goods when receiving them, If any damaged, please immediately report to the carrier.
4) Please kindly notice us if you have special packing requirements.
6)Product quality guarantee
According to the international standard, whole pump 1 year warranty,Spare parts 6 months warranty
Buyers Attention:
1)Can screw pump dry running ?
No, the conveying elements are permanently in contact with one another, which means that dry running must be avoided in progressive cavity pumps. The S T D dry-running protection device offers reliable protection.
2)What temperatures is suitable for using S T D pump ?
S T D progressive cavity pumps can be used at temperatures from -20 C to 150 C (-4 to 302 F).
Company Introduction
Guangdong Standard Fluid Systems Co., Ltd. the largest professional manufacturer in South China about : screw pump, screw valve, emptying system screw products
The screw pump, screw valve, emptying system screw products are advanced technology, perfect structure, various forms, complete specifications, durability, is widely used in sewage treatment, chemical industry, paper, food processing, pharmaceutical, energy, environmental protection, 3D printing and other industries.
The company has an experienced, mature technology, high-quality, reliable screw pump design, manufacturing, testing, after-sales service engineer team. To provide customers with high quality products, excellent solutions and efficient services in the field of fluid systems.
In the production, research and development of screw pump products at the same time, also provides global screw products general accessories (including Germany's Netzsch, Seepex, Viscotec, the British mono, and other branded accessories) and maintenance and custom services, and provide free technical advisory services and improved optimization design. Our excellent processing capacity, rich practical experience and mature technical advantages for our products provide a stable guarantee.
Our services
1 Our screw pump series products, reasonable price, quality service, provide quality inspection. Welcome to sample Custom-made.
2 we have a special quality Supervision Department to ensure the quality of mass production.
3 If the product has quality problems, we will deal with the first time, find out the cause, take responsibility.
4 If you are interested in our products and companies, please leave a message or email us, we will give you an answer within 24 hours
Why choose us ?
1 Factory Direct Sales, no intermediate links, competitive price
2 Our machines are imported from Europe, the original machine factory, the production of stable product quality, do not use low quality equipment.
3 Ensure on-time delivery, procurement, we can provide the best quality of service control, transportation, documentation and so on.
4 We provide samples and OEM services.
5 We will reply to your enquiry within 24 hours.
6 More than 20 years of experience in this industry business, and professional team, so that our customers feel relaxed and comfortable working with us in
7 Please contact us by email and we will send you more pictures for more choices of our products.
How to make an order for S T D screw pump ?
1) Sample approval
2) Client arrange 30% deposit after receiving our PI(pro forma invoice),
3) We start bulk production and finish production within agreed lead time
4) We send shipping documents to client
5) Client arrange balance payment
6) We arrange shipment , and send original documents or telex release the
Add: No, 2 Hengfong Road, Science Technology Industrial Park, Nanhai District, Foshan City, Guangdong Province, China | |||
TEL: 0086-18942424342 | |||
Wechat: 0086-18942424342 | |||
Attn: Ms. June Zhang | |||
Showroom: https://screwpump.en.alibaba.com | |||
www.screwpump.top www.pumpdr.cn | |||
More styles in our showroom!>>>>>www.screwpump.en.alibaba.com