This product is mainly prepared by acrylic copolymer, pigments and auxiliaries, and has excellent resistance to alkali, water, scrub and mildew. The main advantages of advanced interior latex paint are simple construction, non-toxic and safe. What's more, the superiority of this emulsion paint is fast drying with strong adhesion.
Features and characteristics
It is designed for a wide range of interior wall decoration of residential buildings and public buildings, which can be applied on substrate such as cement mortar, concrete, and masonry. As the waterproof property of this product cannot meet the standard of outdoor use, it is merely suitable for interior.
Color Customize Gloss Semi glossy Density ~1.30Kg/L Solid Volume (38±2 °C) % Standard Film Thickness 60µm dry film thickness (about 158µm wet film thickness) Theoretical spreading rate 4.87m²/Kg (60µm dry film thickness) Full Cure (23±2 °C) 7d |
|||
Substrate Temperature To touch (30μm) To handle (30μm) Min. recoating time Max. record time |
10 oC 4h 24h 24h - |
20 oC 1h 24h 1h - |
30 oC 40min 20h 40min - |
* Make sure no chalking and other contaminations before recoating * Above data for reference only, actual drying time and recoating time is dependent on temperature, dry film thickness, ventilation conditions. |
Application Guide
Mixing: Ready to use
Thinner: Clean water
Airless Spray:
Nozzle tip:0.017~0.023 inches Spray pressure:15~18 MPa Thinner ratio:0~10% (by weight of paint)
Brush, Roller: Recommended for small areas only. Must achieve required thickness.
Surface Treatment
Surface treatment: the quality of cement mortar and concrete base shall comply with Construction acceptance code for architectural decoration engineering. The base surface must be clean, dry, solid, free of oil and other dirt, with a PH value less than 10. In case of old coating film wall, should be loose, fall off, powder coating clean, and sandpaper polished smooth. In case of mildew, wash the wall with 25% bleach in hot water, leave the detergent on the surface for 10 minutes, then rinse thoroughly with clean water, dry for 48 hours, and then paint. The surface and gap of the company's construction paint special putty wipe flat. After the treatment of the wall, need to dry in the wall as soon as possible after the construction, to avoid re-pollution
Lowest | highest | epresentative | |
Dry film thickness (μm) | 30 | 50 | 40 |
Wet film thickness (μm) | 65 | 109 | 87 |
Theoretical coating rate (m2 /L ) | 15.3 | 9.2 | 11.5 |
QUALITY ADVANTAGE 1. The certification passed:WRAS,TUV,SGS,ISO,etc 2. More than 20 years factory production and R&D experience |
TECHNOLOGY ADVANTAGE 1. It has more than 30 patents of paint and coating 2. It is the largest paint and coating production base in the three northeastern provinces of China 3. Set up MAIQI college workstation |
BRAND ADVANTAGE |
SERVICE ADVANTAGE 1. Responding to customers` needs with 12hours 2. Ensured delivery within agreed time 3. Technical support through video |