High quality 500l conical fermenter 450L fermenters fermentation tank unitank
Shandong Tonsen Equipment Co., Ltd. was established in 2016 and is located in Shanghe County, Jinan City. It is a company specializing in beer equipment, wine equipment, whiskey equipment and other fermentation system equipment, integrating R&D, production, sales, technical support and service. An integrated international comprehensive enterprise. The product range includes large, medium and small brewery equipment. hotel, bar craft beer equipment, teaching experiment equipment, as well as auxiliary beer equipment such as control systems, the supply of main and auxiliary raw materials for beer brewing, and beer brewing technical training and other services.
1. The introduction of fermentation tank.
Fermentation systems is made up of Fermentation Tank and Bright Beer Tank quantities are based on customer's request. According to different fermenting request, structure of fermentation tank be be designed accordingly.Generally Fermentation Tank structure is dished head and cone bottom,with Polyurethane installation and dimple cooling jackets .There is a cooling jacket on tank cone section,columnar part has two or three cooling jackets.This not only can meet the relevant requirements of cooling, guarantee cooling rate of fermentation tank, also help to precipitation and storage the yeast.
Tank internal and external wall are made of international quality standards of sanitary 304 stainless steel, the Polyurethane insulation thickness between the inner and outer is 50-200mm. Conic bottom install inlet and outlet pipes. Tank installation cleaning system, tank roof device, tank bottom device, rotating wine outlet tube, inflatable device, liquid level meter, sampling valve and other supporting valves, equipped with temperature sensor, with the help of PLC auto-control, the equipment can reach to automatic and semi-automatic control. The height of conic bottom is quarter of the total height. The ratio of tank diameter and height of tank is a quarter of the total height. The ratio of tank diameter and height of tank is 1:2-1:4, the cone angle usually between 60°-90°.
2. The details of fermentation tanks.
3. Main features of fermentation tanks.
1) Capacity:100 liter to 100000 liter as requirement.
2) Material: stainless steel 304/316 or red copper, as requirement.
3) General configuration: mill, brew house, fermentation, cooling and cleaning etc.
4) Heating principle: electric heating, steam heating, gas fire etc.
5) Electricity voltage/frequency can be customized.
6) Running in a high automatization and intellectualization,no pollution.
1. Effective capacity: 100L/500L/1000L/2000L/5000L
2. Dimple plate cooling jacket on tank body and conical bottom
3. Insulation: polyurethane, TH=80mm
4. Interior thickness: 3mm; Exterior thickness: 2mm
5. Dished head and taper angle 60°
6. Temperature sensor TP100
7. Side manhole with pressured door
8. With solenoid valve, breathing valve, pressure relief valve, sample valve, beer outlet valve, drain valve and accessories matched
9. Hops adding port
10. Inner tank mechanical polishing and out plate surface protection ribbon polished on welds
11. CIP 360°rotating spray device
12. Material: SUS304, brushed outer shell
13.4pcs completely SUS304 heavy duty legs with leveling pad
1) All tanks will be packed with soft protection material and mounted on steel frame
2) All accessories and spare parts will be packed with soft protection material and then put into iron box
3) After loaded into containers, all equipment will be fixed to the containers.
1.Free consultation service before, during and after sales.
2.Project planning and design the layout service.
3.Management of equipment's long distance shipping from seller's factory to named port or station by buyer.
4.Training of equipment maintenance and operation personally.
5.New production techniques.
1.Q: It’s the first year(1st year) for you to produce brewing equipments?
A: No. We worked in this business for many years but it’s the 1st year to generalize by alibaba
2.Q:How any years does your warranty?
A:The main equipment for 3 years, auxiliary ones for 1 year.
3.Q;What’s your advantage?
A:We are pioneer and know this business. Our 3 top-level technicists worked in this business over 10 years, 2 senior engineers worked over 8 years, workers average production experience is 3 years.
4.Q: Can you do OEM or ODM?
A: Yes, we can do.
5.Q: How to control temperature?
A:PLC or digital display meter can control the temperature via connecting with the PT100 sensor.
6.Q: Is possible to supply installation in our country?
A: Yes, we could supply engineer to supply installation guidance and training.
7.Q: Can your factory produce equipment according to our drawing or samples?
A: Yes, we can do.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier