Model | Thread Size | Model | Thread Size | ||
Y40-01 | G1/8 | GU40 | G1/8 | ||
Y40-02 | G1/4 | GU50 | G1/4 | ||
Y50-01 | G1/8 | GF40 | G1/8 | ||
Y50-02 | G1/4 | GF50 | G1/4 | ||
Y63-02 | 2.5‘’ | G1/4 | GP40 | G1/8 | |
Y80-02 | 3‘’ | G1/4 | GP50 | G1/4 | |
Y80-04 | 3‘’ | G1/2 | |||
Y100-04 | 4‘’ | G1/2 |
Dials Size | 40mm (1.5 inch) | 50mm (2 inch) | 63mm (2.5 inch) | 100mm (4 inch) | 150mm (6 inch) | |||||
Joints | 1/8 or 1/4 | 1/4 or 1/2 | 1/2 | |||||||
Normally we have three models | Iron case,Copper movement,Copper joint. | |||||||||
Stainless steel cased gauge | Stainless steel case, Copper movement, Copper, Joint | |||||||||
Stainless steel gauge | Stainless steel case, Movement and joint | |||||||||
Accuracy | Usually the accuracy would be 2.5 and 1.6 level, and only the extra accurate pressure gauge can be 0.4 and 0.25 level. | |||||||||
Relevant | According to levels of shock resistance we have normal pressure gauge and anti-shock pressure gauge, the later one is filled with damping liquid (glycerinum or silicone oil) and supported with shock reducer, good capacity of shock resistance is obtained accordingly. | |||||||||
Pressure range is under what you request for Normally used is 0~10bar,16bar,25bar, 40bar,60bar. | ||||||||||
0~60bar is Low pressure range; | ||||||||||
60~400bar is Medium pressure range; | ||||||||||
More than 400bar is High pressure range; | ||||||||||
Vacuum gauge range is -10bar~0; | ||||||||||
Speically range design need add design cost and delievry time been a little longer. |