Technical data:1.Outer tank: Galvanized steel/Stainless steel , thickness 0.4MM,Diameter 460MM/470MM;
2. Inner tank: SUS304-2B, thickness 1.0-2.0MM, Diameter, 360MM; Argon arc welding;
3.Insulation: 50MM Polyurethane Foaming; Density: 40KG/CBM;
4.Bracket:Galvanized steel/Stainless steel, thickness 1.2-1.5MM,Angle as the customer's requirement;
5.Heat Pipe: Copper, TU1, 8mm Diameter; 1700mm length; Vacuum Tube: three target
6.Tank Capacity( Length and Diameter ) can be modified according to the customer's requirement;
8.The heating element, Mg Rod, Reflector and Controller can be provided according to the customer's requirement.
Working principle:
Adopt the temperature difference circulation, controller operates whole system automatically.
1. Pump will start circulation when temperature difference between collector and water reaches the set value.
2. Pump will stop circulation once the temperature difference lower than set value.
3. The circulation pump makes heat-conducting liquid circulate automatically
4. The heat-conducting liquid transfers heat to the water tank by copper heat exchanger.
5. Assistant heating element will start if hot water does not reach set value.