This gsaoline delivery hose assembly is a premium solution designed for gravity fed and low pressure pumping installations. Suitable for use with oil and diesel applications, this fuel hose is available in a range of lengths to meet your requirements.
The premium fuel dispensing hose assemblies come with swaged stainless steel full ferrules and BSP hose tails with sealing o rings. As well as in an assembly, this gasoline hose is available by the metre and in coils if you have a large requirement.
Diesel/oil resistant construction
Anti-static soft wall with NBR cover
Synthetic textile yarn reinforcement
ID 19 or 25mm / OD 27 or 34mm
Temperature -25°C/+70°C
Different lengths of diesel hose available upon request
¾" assemblies available upon request
Assemblies c/w 1" BSP hose tails with sealing o rings & swaged stainless steel full ferrules
LPG hose construction for a given application depends upon the product being transferred and the operational parameters. In particular, refrigerated LPG has a different set of hose system transfer requirements to that of LPG at ambient temperatures.
The design, manufacturing and prototype testing of Oil & Marine LPG hoses for offshore applications have been witnessed, reviewed and approved by the American Bureau of Shipping (ABS). One or more standards may apply, depending upon the particular application.
Cryogenic LPG Hoses
Acceptance criteria for -50˚C operation included the following:
--Long term LPG soak test
--Gas permeation and decompression test
--Thermal insulation test
--Thermal cycling test
--Fatigue testing
Construction features of the cryogenic LPG hose construction include:
---End fitting materials for low temperature service
---Reinforced lining applied along the hose bore to reduce the risk of explosive decompression
---"Bleeder cords" to exhaust any permeated gas to the hose ends
Operational considerations include the possible need for integral ballast to keep a submarine hose submerged in the case of gaseous product, and flange insulation kits to provide electrical discontinuity.
Contact us for advice on LPG hose construction features to suit your particular application.
Specification
Fuel Dispenser Hose Rubber Gas Vapor Recovery Hose
Nozzle side with factory assembled cannot be retrofitted because of non-reusable fittings.
Features and Benefits:
Petrol Pump Hose (outside)
Petrol pump hose DN21-PN16, OD=31mm, hardwalled, smooth surface, suitable for retraction devices up to Min. 150mm.
Hose Fitting (factory assembled)
Nor-reusable safety fittings DN21-PN16 aluminum, swivel nut with standard M 34×1.5 of stainless steel, O-rings of Viton.
Nozzle side with easy rotating swivel with helical spring supported lip seal (Low Temperature) flexible polyurethane. With two key faces width 41mm.
Pump side swivel with O-ring - with six key faces width 36mm.
Vapour Hose (inside)
Vapour Recovery hose DN8-PN16 (OD≈12mm) of polyurethane (LT-flexible). Resistant to petrol and ozone, low diffusion.
Remains stable also with narrow bending radii, because of the steel reinforcements. With vapour hose tail DN8 of PVDF black
with non-reusable stainless steel clamps.
Nozzle side with arresting device through locked vapour hose tail.
Pump side swivel supported to avoid twisting through torsion.
Our Warehouse near Shanghai and Ningbo port which can save the time of tranfer either you decide ship by air or ship by water.
Our professional sales team can support you on the product and after sell service whenever you need.
A: We have our own 2 factories to produce 80% products by ourselves ,including fuel dispenser,fuel nozzle,fuel pump, camlock coupling ,measuring can, jerry can,valve,pipe fitting,flowmeter etc,rest 20% we purchase from our boss's relatives,friends to make sure get cheapest price and these factories working with us over 10 years.
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.