UHFP-D Ultra Highflow Bag Filter Cartridge
Features & Benefits
• High performance filter media
• Pleated configuration with high filtration area
• Large 6"/152mm cartridge diameter suitable for high flow/high contaminant applications
• High mechanical strength
• Easily retrofit into existing size #1 and size #2 bag housing
• The inside-out fluid flow ensures the unwanted particles
are trapped with the element
INTRODUCTION:
Applications
• Prefiltration of RO,Pretreatment of sea water desalination;
• Condensed water, make-up, rinse, process cooling water;
• API, solvents,and water filtration in BioPharm market;
• The filtration of bottled water, high Fructose, edible oil, soft drinks,and milk;
• Paints and coatings,Petrochemical,Refineries;
• Microelectronics,film,fiber and resin;
Material Of Constructions
• Filter media: Pleated PP
• Support/Drainage: Polypropylene(PP)
• End caps: Polypropylene(PP)
• Adjustable flange: Polypropylene(PP)
• O-ring seal:EPDM, Buna
Recommended Operating Conditions
• Maximum Operating Temperature: Pleated PP 60℃
• Maximum Differential Pressure: Pleated PP3.4Bar, 60℃
• Recommended Change out Differential Pressure: 2.4Bar at 20℃
• Suggested Max. Flow rate of water: Size#1 - 550LPM; Size#2 - 1100LPM
Cartridge Dimensions
• Removal Ratings: 0.5um, 1um, 3um, 5um, 10um, 20um, 50um, 70um, 100um
• Outside Diameter: 6"/152mm
• Length: Size#1 : 16"/405mm; Size#2 : 31"/785mm
Ordering Guide
Model UHFP | Media | Micron Rating | Flange Size | Seal | Flange Type | Length |
UHFP-D | PP - PP Pleated | 05:0.5μm | #1:Dia.183mm | E - EPDM | A:For Side Entry-Bottom Outlet Housing | #1:405mm |
Ultra Highflow Bag Type | 1:1μm | #2:Dia.177mm | N - Buna | B:For Top Entry-Bottom Outlet Housing | #2:785mm | |
3:3μm | ||||||
5:5μm | ||||||
10:10μm | ||||||
...... |
UHFP-C Ultra Highflow Filter Cartridge
Features & Benefits
• High dirt holding capacity, long service life
• Less cartridge change out to save the labour cost
• O-ring design cause no bypass to ensure the filtration efficiency
• Easy handing result in less manpower
• Wide chemical compatability for different applications
INTRODUCTION:
Applications
• Prefiltration of RO,Pretreatment of sea water desalination;
• Condensed water treatment for power plant;
• API, solvents,and water filtration in BioPharm market;
• The filtration of bottled water, high Fructose, edible oil, soft drinks,and milk;
• Paints and coatings,Petrochemical,Refineries;
• Microelectronics,film,fiber and resin;
Material Of Constructions
• Filter media: Pleated glass fiber, Pleated PP
• Support/Drainage: Polypropylene(PP)
• End caps:Glass fiber reinforced Polypropylene
• O-ring seal:EPDM, NBR
Recommended Operating Conditions
• Maximum Operating Temperature:
Pleated glass fiber 121℃ / Pleated PP 80℃
• Maximum Differential Pressure:
Pleated glass fiber 3.4bar / Pleated PP3.4Bar, 80℃
• Recommended Change out Differential Pressure: 2.4Bar at 20℃
• Suggested Max. Flow rate of water: 1300LPM
Cartridge Dimensions
• Removal Ratings:1um, 3um, 5um, 10um, 20um, 50um, 70um, 100um
• Outside Diameter: 6.5"/165mm
• Length: 40"/1005mm
Ordering Guide
Model UHFP | Media | Micron Rating | End Adaptor | Seal | Length Inch |
UHFP-C | PP - PP Pleated | 1:1μm | S:Single O-Ring | E - EPDM | 40:40" |
Ultra Highflow Type | GF - Glass Fiber Pleated | 3:3μm | D:Double O-Ring | N - Buna | |
5:5μm | |||||
10:10μm | |||||
...... | |||||
...... |
UHFP-B Ultra Highflow Filter Cartridge
Features & Benefits
• High dirt holding capacity, long service life
• Less cartridge change out to save the labour cost
• O-ring design cause no bypass to ensure the filtration efficiency
• Easy handing result in less manpower
• Wide chemical compatability for different applications
INTRODUCTION:
Applications
• Prefiltration of RO,Pretreatment of sea water desalination;
• Condensed water treatment for power plant;
• API, solvents,and water filtration in BioPharm market;
• The filtration of bottled water, high Fructose, edible oil, soft drinks,and milk;
• Paints and coatings,Petrochemical,Refineries;
• Microelectronics,film,fiber and resin;
Material Of Constructions
• Filter media: Pleated glass fiber, Pleated PP
• Support/Drainage: Polypropylene(PP)
• End caps:Glass fiber reinforced Polypropylene
• O-ring seal:EPDM, NBR
Recommended Operating Conditions
• Maximum Operating Temperature:
Pleated glass fiber 121℃ / Pleated PP 80℃
• Maximum Differential Pressure:
Pleated glass fiber 3.4bar / Pleated PP3.4Bar, 80℃
• Recommended Change out Differential Pressure: 2.4Bar at 20℃
• Suggested Max. Flow rate of water: 1300LPM
Cartridge Dimensions
• Removal Ratings:1um, 4.5um, 6um, 10um, 20um, 40um, 70um, 100um
• Outside Diameter: 6"/152mm
• Length: 40"/1051mm
Ordering Guide
Model UHFP | Media | Micron Rating | End Adaptor | Seal | Length Inch |
UHFP-B | PP - PP Pleated | 1:1μm | S:Single O-Ring | E - EPDM | 40:40" |
Ultra Highflow Type | GF - Glass Fiber Pleated | 4.5:4.5μm | D:Double O-Ring | N - Buna | |
6:6μm | |||||
10:10μm | |||||
...... | |||||
...... |
UHFP-A Ultra Highflow Filter Cartridge
Features & Benefits
• Gradient pore structure
• Up to 110M3/H flow rate per filter cartridge
for water filtration
• Maximum 50% reduction of filter system
• 20", 40" and 60" lengths are available
• All contaminants can be removed off inside the
cartridge by the inside - out flow direction
INTRODUCTION:
Applications
• Prefiltration of RO,Pretreatment of sea water Desalination;
• Condensate water filtration,hot water recovery in power generation;
• API, solvents,and water filtration in BioPharm Market;
• The filtration of bottled water, high Fructose, edible oil, soft drinks,and milk;
• Paints and coatings,Petrochemical,Refineries;
• Microelectronics,film,fiber and resin;
Material Of Constructions
• Filter media: Pleated glass fiber, Pleated PP, Melt Blown PP
• Support/Drainage: Polypropylene(PP)
• End caps:Glass fiber reinforced Polypropylene
• O-ring seal:EPDM, NBR
Recommended Operating Conditions
• Maximum Operating Temperature: Pleated glass fiber 121℃ / Pleated PP 82℃ / Melt Blown PP 65℃;
• Maximum Differential Pressure: Pleated glass fiber4.0bar / Pleated PP4.0Bar / Melt Blown PP2.5Bar ;
• Recommended Change out Differential Pressure: 1.5Bar at 20℃
• Suggested Flowrate of water: 250 - 660LPM/20"L; 500 - 1,300LPM/40"L; 800 - 1,900LPM/60"L
Cartridge Dimensions
• Removal Ratings:1um, 4.5um, 6um, 10um, 20um, 40um, 70um, 100um
• Outside Diameter: 6"/152mm
• Length: 20"/528mm, 40"/1022mm, 60"/1538mm
Ordering Guide
Model UHFP | Media | Micron Rating | Outer Structure | Seal | Length Inch |
UHFP-A | PP - PP Pleated | 1:1μm | B:Bandage | E - EPDM | 20:20" |
Ultra Highflow Type | PM - PP Melt Blown | 4.5:4.5μm | C:Cage | N - Buna | 40:40" |
GF - Glass Fiber Pleated | 6:6μm | 60:60" | |||
10:10μm | |||||
...... | |||||
...... |
FOR MORE PRODUCT DETAILS , PLEASE CONTACT US FREELY
HOPE TO DO GOOD COOPERATION WITH YOU.