Item | Technical Index of Hull | Item | Inside Technical Index | |||
Tensile Strength | ≥13.1MPa | Water Absorption | 1-2g/100cm2 | |||
Break Elongation | ≥11.1% | Breaking Strength | 0.08-0.1MPa | |||
Impact Strength | ≥32.4KJ/m2 | Breaking Elongation | 4-6% | |||
Bending Strength | ≥15.7MPa | Compressive Strength | 0.1-0.24MPa | |||
Weather Resistance After total aging energy≥3.5GJ/m2 | Break Elongation %≥ | 10 | ||||
Oxidative Induction Time 200°Cmm≥ | 10 | |||||
Characteristic | ||||||
* Good flexibility, excellent impact resistance, particular suitable for construction in open sea | * Light weight easy to install and handle, low costs for moving | * High corrosive resistance, 3 times longer life than steel floats | * Higher cost performance than steel float |
Float I.D. | FloatO.D. | Float Length | Thickness of Plastic | Net Buoyancy | ||||
mm | mm | mm | mm | KGS/Float | ||||
160-180 | 500 | 800 | 4 | 280 | ||||
225 | 600 | 700 | 4 | 320 | ||||
280 | 700 | 900 | 4 | 450 | ||||
340 | 1000 | 1000 | 6 | 500 | ||||
410 | 1100 | 1100 | 6 | 550 | ||||
460 | 1200 | 1200 | 6 | 1200 | ||||
510 | 1300 | 1300 | 7 | 1250 | ||||
560 | 1300 | 1500 | 8 | 1360 | ||||
610 | 1400 | 1600 | 8 | 1600 | ||||
630 | 1480 | 1600 | 8 | 1950 | ||||
680 | 1550 | 1800 | 8 | 2200 | ||||
730 | 1620 | 1900 | 9 | 2300 | ||||
780 | 1700 | 2000 | 9 | 2700 | ||||
840 | 1850 | 2100 | 12 | 3200 | ||||
890 | 2000 | 2400 | 12 | 4600 | ||||
940 | 2040 | 2500 | 13 | 4900 | ||||
1150 | 2400 | 2600 | 14 | 6500 | ||||
NOTE: 1.1 pair of floaters could float 4 meters long HDPE dredging pipe and 1.5m long rubber hose. 2. The floaters customerized is available. |