High-accuracy Cooking Oil Purifier with Full Stainless Steel Filters For Reused

S High-accuracy Cooking Oil Purifier with Full Stainless Steel Filters For Reused

Application

1.This machine is applied to purifying palm oil, cooking oil, vegetable oil, swill-cooked oil, rapeseed oil, sunflower seed oil, olive oil, peanut oil, coconut oil, etc.

2.It can effectively remove water, gas, grease, impurities particulate matters, air, volatile matter (for example ethyl alcohol, gasoline, ammonia) and other contaminants from oil, and strongly demulsify, by which to reduce oil's water content and impurity content, improve oil cleanness.So after the treatment by the machine, a new fresh oil come into being, and the previous used cooking oil/vegetable oil will become limpidity, and fresh quality, and has good quality to produce other products, such as biodiesel, soaps, and so on.

3.This machine consists of electric heating system, vacuum evaporation system, multi-stage filtration system etc. If the oil is for edible food, it can be made of stainless steel type.

Machine features

1. COP is composed of vacuum filtration system, which equips three grades filters, all of mesh filters are made of stainless steel, which make sure anti-corrosion and reliable.

2.COP vacuum filtration system adopts the vacuum vaporizing technology to remove water, odor, alcohol and volatilization materials to Inhibit acid value and peroxide value increases.

3.High quality filtering components, large capacity for holding particles, anti-corrosion, good mechanical performance, long lifetime.

4.Efficient electric heating system, heating uniformity, less power consumption, safe, and reliable.

5.Adopts interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank heating, blank pumping, oil leak and electricity leak. If there is any fault, machine will be power off automatically.

6.The unique degas and dewater system: Using the Stereo-Evaporation technical, which can separate the water and gas from the oil quick by the Multi-level water-oil separation technology.

Working principle

When TYA starts working, oil will be sucked into heater by vacuum pressure, then the oil will be heated and flow into primary filter, where the big impurities are separated. then, oil flows into vacuum separator, and flows through a special designed device, which makes per unit volume oil to produce a large surface area, lets the oil exposure in low humidity atmosphere, so the gas and water are separated from oil. the gas and separated water vapour forms as mixed gas, flows through water tank and cooler, condense into liquid and flows into water receiver, the residual gas is exhausted by vacuum pump. Oil flows through oil pump and into fine filter, where the tiny impurities are separated. If the oil is very dirty, or is high water content etc., you can purify the oil circularly for several times, by which to remove the water and impurities completely.

Machine Mainly Parts

Machine’s Main Advantaged Technologies

1.Dehydration System

The free water and water vapor pass through the coalescing separation device (mainly with oleophilic hydrophobic and hydrophilic oleophobic materials), which mainly allows the oil to pass smoothly and the water is automatically separated; for the dissolved water and the emulsified water, the polymer is broken. The emulsification system, the German three-dimensional flashing technology, the atomization generating device, the three-dimensional evaporation device, the thin film vaporization, the Bower's expansion device for the micro water, the binary dehydration device is truly realized, the moisture in the oil is quickly separated, and Deep dewatering, reaching ≤5PPM

2.Degassing system

Adopts the most advanced low-temperature plasma, micro-gram technology, circulating distillation and other technologies, the water and gas in the oil are automatically dehydrated and automatically emulsified by the aggregation and separation technology to remove a large amount of water from the oil. This process removes 100% free water and free gas, 80% dissolved water and 65% dissolved gas. After that, the oil containing traces of moisture and gas is fully atomized by three-dimensional flash evaporation technology to increase the thinning of oil, water and gas molecules, and then the gas in the deep and more cut-out oil

3.Distinctive Filtering System

We adopt the double mesh type impurity removal method, firstly remove all the impurities containing impurities with particle size ≥5μm or more in the oil through the filter filter; then use the molecular adsorption material (HDM) imported from Germany to make the FH filter with ≤5μm impurities. By removing the impurities of 1-5 μm in the oil by adsorption, the cleanliness of the oil is guaranteed to reach NSA level 6.

4.Pressure Overload Protection System

It has pressure overload protection, automatic anti-dry burning, automatic defoaming, and unique infrared liquid level automatic control device (better than photoelectric automatic control device), which can automatically adjust the balance of oil in and out to achieve man-machine separation and make the operation more convenient and reliable.

Oil Parameter After Purification

OPTIONAL PARTS
1. PLC
2. Flow meter
3. Enclosure
4. Regeneration device
5. Explosion-proof motors and electric apparatus
6. Consumables, such as replacement filters
7. Customer’s design or any other special requirement

FRONT VIEW 
1. Oil inlet valve                                                  30. Fine filter drain valve
2. Heater                                                             31. Sampling valve 
4. Temperature controller                                32. Oil outlet valve
5. Primary filter 1                                               34. Vacuum gauge
6. Primary filter 2                                               35. Demister
16. Water separator oil outlet valve               36. Demister oil level gauge
18. Vacuum separator                                     37. Demister drain valve
19. Vacuum adjust valve                                 39. Cooler
24. Pressure gauge                                        45. Vacuum pump isolating valve
26. Circulating valve                                        52. Observation window
27. Fine filter isolating valve                          53. Control button
28. Fine filter bypass valve                            54. Label
29. Fine Filter                                                   55. Electrical cabinet

After-sale Service:

1.3 Years grarantee for whole machine.

2.24 hours technical support by e-mail.

3.Calling or door-to-door service.

4.Use-friendly English software,user manual and detailed Videos/CD.

Manufacturer Used Cooking Oil Bottle Used Plastic Blow Moulding Machine