1.Chief Technology Parameters & Contour Dimensions:
Remark:We can produce small batch precision sampling non-inductance resistors of the precise voltage devider & the resistors of the high voltage and power divider according to the user's special requirement.
2.Contour Drawing:
3.Chief Characteristic:
1. Enduring high voltage and high power.
2. Professional resistor manufacturers;
3. Resistor production original place: Xianyang in Shaanxi, made in china;
4. We mainly produce glass glaze resistor;
5. It can be used as shunt resistor.
4.Technology Standard:
1. GB /T5729-2003/IEC60115-1:2001
2. Q/QH1618-2007
5.Product Details:
6.Applications scope:
1.Medical Equipment
2.Broadcasting Equipment
3.Measurement Equipment
4.High Power Supply
5.X-Ray
6.High Voltage Inverter
7.Laboratory HV Equipment
7.Power Derating Curve:
Chief Testing Items & Testing Result of CNAS Laboratory Authentication
Test item | Test condition and Performance index request | Testing result |
Temperature coefficient | Test the resistance value at normal temperature and normal temperature added 100°C,calculate per °C resistance value change rate;Test condition:+25℃~+125℃;Performance index request:TCR≤±400PPM/℃ | (5.7~377)PPM/℃;Qualified |
Short time overload |
Test condition:4 x rated voltage, for 60 seconds (1 minute);100W:1.7MΩ-13.20KV;2.1MΩ-16.6KV;3.3MΩ-26.40KV; 5.5MΩ-44.00KV; 150W: 6.6MΩ-52.80KV.Performance index request:Without burning; Surface insulation breakdown, no arcing and carbonization |
Qualified |
Overload |
Test condition:The resistor in following conditions keep 15s,100W:1.7MΩ-29.10KV;2.1MΩ-32.40KV;3.3MΩ-40.62KV; 5.5MΩ-52.40KV; 150W: 6.6MΩ-70.36KV.Performance index request:ΔR≤(±1%)R |
100W:ΔR:(0-0.49)%R;150W:ΔR:(0.15-0.20)%R; Qualified |
Vibration | Test condition:10Hz-500Hz,amplitude A=0.75mm or accelerometer a=98m/s*s,for 6h,recycled every 10 min.Performance index request:ΔR≤(±2%)R | ΔR:(-0.06-0.12)%R;Qualified |
Temperature fast changed | Test conditon:keep 30min in (-55±3)℃, then warming to (125±3)℃,keep 30 min. 5 cycles.Perfoemance index request:ΔR≤(±1%)R | ΔR:(-0.10-0.06)%R;Qualified |
70℃ durability | Test condition:in(70±2)℃,with rated voltage keep 96h.Performance index request:ΔR≤(±1%)R | ΔR:(0-0.62)%R;Qualified |
Steadydamp-heat | Test condition:T:(40±2)℃,t:96h.Performance index request:ΔR≤(±2)%R | ΔR:(0-0.38)%R;Qualified |
Packaging:
1.Encapsulated with plastic film first;
2.With a foam box packaging second;
3.Then use carton packaging.
4.Last use wooden box.
Note:According to the difference of the contour dimensions,the packaging will be different. Please in kind prevail.
Shipping:
We use large international logistics companies, such as EMS,DHL,FedEx,TNT,UPS, Whose logistics services guaranteed to provide the waybill number, tracking cargo information at any time.
You can also use designated logistics company. We provide convenient services for you.
Note: The above is simple flow chart. The concrete issues please refer to our contract.
Why choose us?
Service:
Quality Control:
We have got Gb/T19901-2008/ISO9001:2008 Quality Management Systems Certificate in December,2010.
1.Company Profile:
Xianyang Qin Hua Specialized Electronic Components Factory engages for the all kinds of specialized electronic components producing .Our factory mainly produce metal glaze film resistor,oxide film resistor and wire wound resistor.Our factory have strong capacity to develop specific electronic devices.In December 2010,we have got GB/T19001-2008 & ISO9001:2008 Quality Management Systems Certificate.
2.About Our Company :
Introduction Of Resistor Reference Material:
1.How to choose the resistor ?
1 We would like to commend the wirewound resistor for you when it will be used in low voltage(220v-3.5kv).
2 It is better to use glass glaze resistor in high voltage(above 5.0kv).
3 For high-frequency circuits,to recommend oxide film resistor or glass glaze resistors.The resistance of the structure body,determines that it has a low inductance.There are requirements on the circuit inductance,film resistor is your best choice.
2.Resistor structure model and parameters characteristics ?
2.1 Glass Glaze Resistor:It is extremely stable chemical properties resistor paste coated on 95%AL2O3 ceramic tube,high temperature resistance film formed after firing.In order to guarantee stable electrical performance parameters,the surface to be coated with a protective lacquer.Its characteristics:
Resistance Range:Ω--GΩ
Power Range:0.5--500W
Frequency Response:less oxide film resistor ideal,but much better than wire wound resistors.(Called non-inductive resistor)
2.2 Oxide Film Resistor:It is the liquid chemical reagent injected into the high pressure borrow about 800℃ 95%AL2O3 ceramic tube,in the high temperature generated in the resistive film.Surface without protective lacquer coating.Its characteristics:
Resistance Range:1Ω--5KΩ
Power Range:10W--500W
Frequency Response:≥100MHz Truly non-inductive resistor
2.3 Wire Wound Resistor:Alloy resistance wire is wound on an insulating substrate for the endurance temperature,the surface protective layer coating made of resistive components.Because the different of the coated and package,it can divided into paint type,glaze type,metal shell type,porcelain shell type.Its characteristics:
Resistance Range:0.15Ω--20KΩ
Power Range:1W--500W
Frequency Response:inability to completely eliminate inductive factors,the frequency characteristics of the worst of the three resistors
3.High voltage resistors abide by electronics basic formula yet Using in the equipment circuit ?
Ohm Law
V=IR
Here:
I-Flowed Resistor Current,Dimension:A.
V-Voltage Exerted Resistor,Dimension:V.
R-Resistor’s Resistance,Dimension:Ω.
4. How to choose the resistor power?
Power is larger (≥ 20W) of the load resistor at full power for a long (more than 2 hours) work surface will produce 300℃ temperature of around. And safe use of the resistor surface temperature is preferably maintained at less than 200℃. Therefore, when the choice of the resistor, reduced power in using should be considered.
5.Withstanding Voltage?
China National Standard GB/T5729-2003/IEC60115-1:2001 in on the withstand voltage so provides:”In addition to surface mount resistors for all except resistors,test voltage shall be applied to the following two electrodes between:two resistors connected together as a lead-out electrode,V-block,a metal foil or mounting member as the other electrode,test voltage is AC(40Hz-60Hz),the peak of about 100v/s rate of rose from zero detailed specification insulation voltage worth 1.42 times the specified voltage is reached after keeping 60s(±5s).
Obviously,this is the measurement resistor resistance of the insulation coating layer or carrier(such as porcelain) the withstand voltage performance.Therefore,the Withstanding Voltage are not necessarily linked with the resistor’s other technical parameters,like power,resistance,etc.
6. Using note?
The resistor is a heating component. During use, please pay attention to whether the surface temperature rise have effect on other elements. Of course, when choosing resistor, we will provide all technology parameters of the product for you to ensure your using. Please use according to technology parameter!
7. Why ask the working voltage, resistance value, resistor tolerance, temperature coefficient, contour dimension, main use of the resistor for the buyers every time?
Our company offer products in multiple dimensions, types, uses. According to that data you providing, we will choose optimum resistor for you. The optimum resistor will bring to the good influence for your produce, reducing power consumption and extending use life.