High Voltage Programmable 2 Channel Digital Frequency Arbitrary Waveform DDS Signal Generator
Square Wave Programmable 2 Channel High Voltage Digital Frequency Arbitrary Waveform DDS Signal Generator
Twintex TFG5200 Series 25MHz 40MHz 60MHz Programmable DDS Arbitrary Waveform Function Generator
Introduction
The TFG5200 series are arbitrary waveform/function generators with maximum frequency of 25MHz, 40MHz and 60MHz, based on Direct Digital Synthesis (DDS) technology, providing high fidelity, low jitter performance function signal and arbitrary waveform signal.
The TFG5200 series are equipped with 150MSa/s sampling rate, 14 bits vertical resolution, ±1ppm high stability and high accuracy waveform output, 250MHz frequency counter, as well as digital modulations of AM, DSSC AM, FM, PM, ASK, FSK, BPSK. Built-in USB device, USB host and RS232 interface support easy remote control. 4.3-inch TFT LCD display, user-friendly interface design and keyboard layout brings excellent operation experience.
Features
Frequency range 1μHz~25MHz/40MHz/60MHz
2 independent output channels at same frequency range for main waveforms
4.5-inch TFT LCD display
Min. output amplitude 1mVpp (50Ω), total distortion 0.2%
Sampling rate 150MSa/s, vertical resolution 14 bits, waveform length 16k points
6 standard waveforms, 50 built-in waveforms and 12 user-defined arbitrary waveforms
10 sets save & recall for operating parameters
Modulations: AM, DSSC AM, FM, PM, ASK, FSK, BPSK
Synchronous output, external modulation input, trigger input, external reference input and count input
Linearity/Logarithmic sweep signal and Burst signal
Channel coupling, parameter (frequency, amplitude, offset, phase) coupling, point frequency replication tracking
Strong arbitrary waveform building software, support SCPI commands
Over voltage, over current, short circuit and reverse voltage protections
Standard interface: RS232, USB device, USB Host
250MHz external frequency counter
Optional power amplifier
Specifications
|
Model |
TFG-5225 |
TFG-5240 |
TFG-5260 |
|
|
Output Frequency |
||||
|
Range |
Sine |
1μHz ~ 25MHz |
1μHz ~ 40MHz |
1μHz ~ 60MHz |
|
Square |
1μHz ~ 5MHz |
1μHz ~ 10MHz |
1μHz ~ 15MHz |
|
|
Ramp |
1μHz ~ 500kHz |
1μHz ~ 1MHz |
1μHz ~ 1MHz |
|
|
Pulse |
1μHz ~ 5MHz |
1μHz ~ 10MHz |
1μHz ~ 15MHz |
|
|
Noise |
30MHz white noise (-3dBm) |
|||
|
Arbitrary |
1μHz ~ 6.5MHz |
|||
|
Resolution |
1μHz |
|||
|
Accuracy |
≤±5x10-5 |
|||
|
Waveform |
||||
|
Output waveform |
Sine, Square, Ramp, Pulse, Noise, Arb, DC |
|||
|
Waveform length |
8~16384 points (CHA), 8~2048 points (CHB) |
|||
|
Vertical resolution |
14 bits |
|||
|
Sampling rate |
150MSa/s |
|||
|
Sine |
Harmonics distortion < -70dBc, < 20kHz < -50dBc, 20kHz ~ 1MHz < -40dBc, 1MHz ~ 30MHz < -30dBc, 30MHz ~ 60MHz Total distortion≤0.2% (20Hz ≤ f ≤100 kHz) |
|||
|
Square Pulse |
Rise/fall edge: 18ns Duty cycle: 0.1% ~ 99.9% Edge jitter: ≤150ps rms |
|||
|
Ramp |
Symmetry: 0.0% ~ 100.0% Non-linearity ≤0.1%, 5%~95% of signal |
|||
|
Noise |
Repeat cycle >50 years |
|||
|
Arbitrary |
Sampling rate : 1μSa/s ~ 50MSa/s Vertical resolution: 14 bits |
|||
|
Output Characteristics |
||||
|
Amplitude |
CHA range (High impedance) 2mVpp~20Vpp ≤15MHz 2mVpp~10Vpp ≤60MHz (50Ω) 1mVpp~10Vpp ≤15MHz 1mVpp~5Vpp ≤60MHz |
|||
|
CHB range 2mVpp~6Vpp (High impedance) ≤60MHz 1mVpp~3Vpp (50Ω) ≤60MHz |
||||
|
Flatness (1kHz) ±0.1dB (<100kHz), ±0.5dB (100kHz ~ 10MHz) , ±1.0dB (10MHz ~ 60MHz) |
||||
|
Offset |
CHA level range: ±(10V DC~AC peak/2) (High impedance) ±(5 VDC~AC peak/2) (50 Ω) |
|||
|
CHB level range: ±(189.3 mV DC–AC peak/2) (High impedance) ±(94.7 mV DC –AC peak/2) (50 Ω) |
||||
|
CHA accuracy: ±1% offset setting value ±0.25% amplitude setting value ±2mV |
||||
|
CHB accuracy: ±1% offset setting value ±0.25% amplitude setting value ±3mV |
||||
|
Modulation |
AM modulation depth : 0.0%~120.0% |
|||
|
FM modulation deviation : 0 ~fc/2 |
||||
|
PM modulation range : 0.0°~360.0°, |
||||
|
FSK : 1μHz~Fsine max (Sine), 1μHz~ Fsquare max (Square/Pulse), 1μHz~ Framp max (Ramp) |
||||
|
BPSK : 0.0°~360.0° |
||||
|
ASK : 2mVpp~ 20Vpp |
||||
|
Sweep |
Sweep mode : Linearity/Logarithmic |
|||
|
Sweep time : 0.001s~1000s |
||||
|
Trigger source : Imm/Ext/Bus |
||||
|
Burst |
Burst mode : N Cycle/Gated |
|||
|
Burst numbers : 1~1000000, resolution 1 |
||||
|
Interval time : 1μ ~1000S, resolution 1μS |
||||
|
Pulse |
Pulse width : 28.5 ns ~ period - 28.5 ns |
|||
|
Overshoot: ≤2%(CHA) (50Ω) |
||||
|
Edge jitter: ≤150ps rms |
||||
|
Counter |
Frequency range : 0.1Hz~250 MHz |
|||
|
Resolution : 6 digits/s |
||||
|
Power amplifier (optional) |
Frequency bandwidth: 20Hz~200kHz |
|||
|
Max. output power: 5W sine wave |
||||
|
Interface |
USB Device, USB Host, RS232 |
|||
|
Power source |
AC100~240V, 47~63Hz, Max. 30VA |
|||
|
Accessories |
Power cord x1, Operation manual x1, Software CD x1, USB cable x1, RS-232 cable x1, BNC-BNC cable x1, BNC-Crocodile cable x1 |
|||
|
Dimension |
Chassis: 260Wx110Hx385D mm Instrument: 295Wx195Hx415D mm |
|||
|
Weight |
4kg |
|||
All products by TWINTEX are tested and guaranteed to keep in good quality with one year warranty except wearing parts, such as test leads and power cords.
If quality problems happen during warranty period, we provide technical supports and spare parts. Our local distributor if any will help to solve your problems in time after receiving phone calls or emails.
Welcome to contact us at any time if any questions about using our products.
However, TWINTEX is free of responsibility to personal injuries or property damages caused by improper operation.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier