Welcome to browse our products: High Viscosity Liquid Rubber Extrusion Hot Melt Gear Pump
Operating Parameters:
Outlet/Inlet: | 1 outlet/ 1 inlet |
Flow per Outlet cc/rev: | 0.15 cc/r |
Operating Temperature: | <200℃ |
Max. Outlet Pressure: | <8MPa |
Min. Inlet Pressure: | <0.2MPa |
Rotate Speed: | 10~200 r/min |
Shaft Sealing: | Combined Sealing |
1. Polymer extrusion molding, such as granulation, film, pipe, plate, sheet, etc.
2. Transporting high-viscosity materials such as PC, PMMA, ABS, HIPS, PET, PVB, PS, PP, PA, PE, PVA and so on.
3. Simultaneously, transporting rubber, asphalt, paint, adhesives, coatings, lubricants, Polyalcohol and other non-particulate impurities.
4. Pressurized transporting and spinning polyester for cotton-fiber, polypropylene and other chemical fiber melt.