The carcass consists of EP in warp and NN in weft. The belts are laminar construction. Add a wear-resisting canvas to the contact surface of elevator belts. It is high performance belt suitable for grain processing industry.
Usage:
*Mainly apply to normal temperature,no wet and corrosion environment. Usually for small bulk granular materials of non-oleaginous or non-biological additives.
*Elevator belt width ≥500mm and the height ≥35 meters. Enhanced round edge elevator belt can be customized according to the intensity request.
*According to the work condition, heat-resistant, anti-corrosion and anti-static elevator beltcan be customized
*In order to improve the transmission efficiency, reduce abnormal wear of the belt, we recommended to use pulley with rubber cover.
Supply characteristics
*Do not need to order by whole roll, length and width can be customized .
*Drill hole service can be provided to make install and usage easy.
Model | Carcass | Through thickness longitudinal strength at break (N/mm) | Elongation at Rated Load (≤%) | Thickness (mm) | Recommended Minimum Diameter of Pulley(Φ) | ||
Bare drum | Rubber drum | ||||||
600YP | 3EP+1CC | 600 | 1.6 | 5.0+0.2 | 360 | 300 | |
800YP | 4EP+1CC | 800 | 6.5+0.3 | 500 | 400 | ||
1000YP | 5EP+1CC | 1000 | 8.0+0.5 | 600 | 800 |