High Temperature Heat Resistance Silicone Resin Thermo Shield Paint
FX200 Celsius Silicone High Temperature Aluminum Finish | |
Mixing Ratio | Two component: base/curing agent=17/3 by weight |
Solid Content | 35% |
Specific Gravity | 1.0 |
Film Thickness | Dry Film: 25um/coat Wet Film: 45um/coat |
Color | Silvery |
Spreading Rate | Theoretical value: 0.09kg/m2/25um 0.09L/m2/25um Practical value: according to surface condition, outer environment, construction method etc. |
2.Product Display:
(1) Quick drying, and excellent physical and mechanical properties.
(2) Excellent heat resistance.
(3) Excellent resistance to weather.
(4) Good workability.
3.Figures of Painting:
Application Method | Airless Spray | Recommended |
Nozzle Tip | 0.4-0.5 mm | |
Nozzle Pressure | 100-150kg/ cm2 | |
Thinning Ratio | 0-5% (by weight) | |
May be applied by airless spray, air spray, brush and roller. | ||
Thinner | Silicone High Temperature Thinner | |
Temperature of thermal resistance | 200oC, 250oC (the highest transient temperature) | |
Surface Preparation | -The surface of the primer must be clean, dry and free of contaminants. -Please pay attention to the coating interval. | |
Compatible Preceding Coat | 200°C Heat-resistant Primer or Inorganic Zinc-Rich Anticorrosive Primer |
Temperature | 5°C | 20°C | 30°C |
Pot life | 8 | 6 | 5 |
Drying Time & Coating Interval
Temperature (°C) | 10 | 20 | 30 |
Dry To Touch (min) | 80 | 60 | 40 |
Dry Hard (hrs.) | 8 | 7 | 6 |
Min. Interval (hrs.) | 8 | 7 | 6 |
Max. Interval (d) | - | - | - |
Shelf Year | One Year |
Package | 2K packaging: A kit 20kg contains Part A 17kg and Part B 3kg. |
4.Packaging:
Usage:Suitable for spraying to iron and steel surfaces and other high temperature components under 200°C, with protective property as well as resistance to heat and corrosion.
Safety Methods:
The following shall be guaranteed during any paint applications:
Avoid skin and eye contact.
In case of skin or eye contact, flush with large amount of water and immediately get medical attention.
Assure well-ventilated working place.
Take precautions of the risks of fire or explosion.
Observe all health and safety regulations on site.