Applicable Industries:: Garment Shops, Building Material Shops, Manufacturing Plant, Machinery Repair Shops, Home Use, Retail, Construction works , Energy & Mining, Other, Advertising Company

Weight (KG):: 3

Showroom Location:: None

Video outgoing-inspection:: Provided

Machinery Test Report:: Provided

Marketing Type:: Ordinary Product

Brand Name:: HC Machinery

Application:: Milling, Milling Drilling Tapping Grinding

Maximum Torque:: 24000RPM

Drive:: Motor

Operating Speed:: 24000RPM, 24000Rpm

Warranty:: 6 months

Core Components:: Spindle

Product name:: JGF-65A-0.8KW Motor Spindle

Cooling type:: Round Air Cooling

Voltage:: 220v

Frequency:: 400Hz

Collect:: ER11

Speed:: 24000RPM

Current:: 2.5A

Lubrication:: Oil Grease

Packaging & Delivery

High Speed CNC Spindle Motor Spindle Water-cooled 0.8kw Spindle Motor For Cnc Machine from China supplier

Product Parameter

Spindle Type	JGL-65A-0.8KW
Diamenter	65*195 mm
Speed	24000 RPM
Power	0.8kw
Voltage	380V
Current	2.5A
Frequency	400 HZ
Collet	ER-11
Cooling System	Air Cooling
Lubrication	Grease
Bearing number	4 Pieces

Product Details

Products Description

Product Application

After-sales Service

Product maintenance and maintenance

1. When abnormal sound or vibration is found during the operation of the motorized spindle, the bearing should be stopped immediately and replaced with a new bearing when necessary.When the operation of the smell or sudden stop, should immediately cut off the power supply, with a shaking meter to measure the ground resistance and three-phase resistance of the stator, the loss of insulation resistance for the stator burned out should be returned to the factory to replace the stator. 2. When the electric spindle is out of service for a long time, the application of compressed air will blow the residual coolant in the cooling pipe clean, and the electric spindle rust prevention: the electric spindle is stored or out of service for 6 months, it must be replaced with new oil before it can be used, otherwise it will affect the life of the electric spindle. 3. In order to extend the service life of the motorized spindle, the new motorized spindle or the motorized spindle with new bearing should be evenly divided into 4~8 grades within the speed range, and the speed will rise again after 30min for each section, so as to avoid the direct high-speed operation and shorten the service life of the bearing.After the holiday, start the electric spindle running for half an hour without load, and then start work. 4, the damaged motorized spindle must be repaired, should be returned to the company by our company to repair, the company will serve you wholeheartedly.

Why Choose Us

About Us