L/D: 33:1
Capacity:220kgs/h
Motor power:55KW
Output/Energy: 4.2kg/kW
Or
Model:HSJ60/38L/D: 38:1
Capacity:380kgs/h
Motor power:90kW
Output/Energy: 4.2kg/kW
Feeder | • To feed material into extruder |
Extruder | • World famous brand electrical component such as Siemens, Schneider, ABB etc; • High torque gearbox with adopts NSK/SKF bearing; • Siemens/WEG original motor achieved global after service; • Bimetallic screw and barrel; • Intelligent PLC controlling system with human-friendly interface. |
Die head | • 40Cr material • Complete set include extrusion die head, Slotting & water ring type calibration sleeve • Apply to PE/PP, co-extrusion, multi-layers co-extrusion etc |
Vacuum calibration tank | • Include full set of vacuum and water pump • length from 6m-9m |
Haul off | • Upper and lower caterpillar is driven separately by the frequency inverter • Fast change type pads |
Cutter | • Tracking cutter or Non-dust cutter, Blade rotates around pipe and cut off pipe with smooth surface. • Synchronous control |
Stacker | •Stainless steel 304 as touching material •Discharge driving by air cylinder |
Model | O.D.(MM) | Extruder | Max. output(kg/h) | Max haul-off speed (m/min) | Motor Power(kw) |
PE110 | 20-110 | SJ65/33 | 220 | 15 | 55AC |
HPE110 | 20-110 | SJ60/38 | 380 | 25 | 90AC |