CONDUCTOR | Solid bare copper | |||
Conductor Dia.: 0.55±0.005mm | ||||
INSULATION | Raw material of the Insulation: PE | |||
INSULATION | Quantity:4 twisted pairs | |||
Blue/white-blue; | Green/white-green | |||
Orange/white-orange; | Brown/white-brown | |||
Insulation Dia. : 0.95 ± 0.005mm | ||||
Average thickness: 0.2mm | ||||
Minimum point thickness: 0.1975mm | ||||
SEPARATOR | Center cross | |||
RIP CORD | Nylon thread | |||
JACKET | Jacket material: PVC or LSZH | |||
Color: As per customers request | ||||
Nominal Dia.: 6.1 ± 0.2mm | ||||
Average thickness: 0.60mm | ||||
Minimum point thickness: 0.50mm | ||||
CABLE MARKING | As per customers request (OEM) | |||
Application | Primary(Campus), Secondary(Riser), Tertiary(Horizontal) | |||
IEEE802.3: 10 Base-T ; 100 Base-T ; 1000 Base-t ; | ||||
IEEE802.5 16MB ; RDSI/ISDN; 100 Mbps TPDDI; | 155 Mbps ATM | |||
Standard | TIA/EIA 568.B | EN50173-1 | ||
IEC/ISO11801 | ANSI/TIA/EIA-568B2 | |||
Mechanical properties | ||||
MINIMUM BENDING RADIUS | Installation: 8×O.D. | Installed: 4×O.D. | ||
TEMPERATURE RANGE | During operation: -55°C -- +60°C | During installation:-15°C -- +50°C | ||
MAX TENSILE LOAD | During operation: -- | During installation:110N | ||
Resistance unbalance | ≤2% | |||
Insulation resistance | ≥90 MΩ/km | |||
Capacitance | 230pF/m | |||
Capacitance unbalance | ≤330 pF/100m | |||
Characteristic impedance | 1-100Mhz: (100±15) Ω | |||
Nominal velocity of propagation | ≥Approximate 62% | |||
Propagation delay | ≤537 ns/100m @ 250MHz | |||
Delay skew | Nominal 45 ns/100m, 1-250 MHz | |||
Test voltage(DC, 1 min) | 1000v |