1)Specs For Rigid pcb:
Specifications |
Standard Technology |
Advanced Technology |
Number of Layers |
1 - 12 |
14 - 40 |
Board Material |
FR-4 (Tg-135C, 145C, 170C), Halogen- free Rogers Ultralam 2000, Rogers RO4350, Rogers RO4003 Polyimide Black FR-4 Arlon AR-350 Getek Copper Clad Thermal Substrates (Rogers and FR4) BT Epoxy Nelco 4013 PTFE Metal Core Materials Aluminum Core |
|
Minimum Board Thickness |
2 layer - 0.010" 4 layer - 0.020" 6 layer - 0.020" 8 layer - 0.062" 10 layer - 0.062" 12 layer - 0.062" |
2 layer - 0.005" 4 layer - 0.010" 6 layer - 0.031" 8 layer - 0.040"
|
Maximum Board Thickness |
2 layer - 0.125" 3-12 layer - 0.200" |
0.250" - 0.500" |
Copper Thickness |
0.5 oz - 3 oz |
4 oz - 6 oz |
Hole Aspect Ratio |
7 : 1 |
15 : 1 |
Minimum Hole Size |
0.008" |
0.006" |
Minimum Trace/Space |
0.006"/0.006" |
0.003"/0.003" |
Minimum Drill-to-Copper |
0.010" |
0.003" |
Minimum Pitch |
1 mm |
0.3 mm |
Surface Finish |
HASL (Solder) Lead Free Solder Copper Gold Gold Fingers White Tin OSP |
HASL Gold (ENIG/Hard/Soft) ENEPIG Selective Gold Immersion Silver OSP White Tin |
Solder Mask |
Green/Black/Red/Blue/Yellow/White/Clear |
Orange/Mix-and-match |
Silk Screen |
White/Black/Yellow |
Green/Red/Blue |
Quality Standards |
IPC 6012 Class 2 Electrical Testing 100% Netlist Testing TDR Testing ISO9001 |
TS16949 |
2) Specs for Flex pcb:
Item |
Description |
|
Layer |
Flex board: 1-6Layers |
|
Material |
PI, PET, PEN, FR-4 |
|
Final Thickness |
Flex board: 0.002" - 0.1" (0.05-2.5mm) |
|
Surface Treatment |
Lead-free: ENG Gold; OSP, Immersion silver, Immersion Tin |
|
Max / Min Board Size |
Min: 0.2"x0.3" Max: 20.5"x13" |
|
Min Trace |
Inner: 0.5oz: 4/4mil Outer: 1/3oz-0.5oz: 4/4mil |
|
Min Hole Ring |
Inner: 0.5oz: 4mil Outer: 1/3oz-0.5oz: 4mil |
|
Copper Thickness |
1/3oz - 2oz |
|
Max / Min Insulation Thickness |
2mil/0.5mil (50um/12.7um) |
|
Min Hole Size and Tolerance |
Min hole: 8mil |
|
Min Slot |
24mil x 35mil (0.6x0.9mm) |
|
Silkscreen Line Width |
5mil |
|
Gold Plating |
Nickel: 100u" - 200u" |
Gold: 1u"-4u" |
Immersion Nickel / Gold |
Nickel: 100u" - 200u" |
Gold: 1u"-5u" |
Immersion Silver |
Silver: 6u" - 12u" |
|
OSP |
Film: 8u" - 20u" |
|
Test Voltage |
Testing Fixture: 50-300V |
|
Profile Tolerance of Punch |
Accurate mould: ±2mil |
|
Ordinary mould: ±4mil |
||
Knife mould: ±8mil |
||
Hand-Cut: ±15mil |
To ensure an accurate quote, be sure to include the following information for your project:
Your custom quote will be delivered in just 2-24 hours, depending on the design complexity. |