High Quality LCD Display Control 2CH DMX512 Master Controller

Functions of 2CH DMX512 Master Controller:

1,Gray level 32-65536 to control, real image color and detail.

2,Fast key setting controller parameters with press-buttons.Such as Driver Chip type,the Controller Serial Number,Program Fragment,Play Speed,LED Brightness.

3,Display module to display and control parameters, state.

4,Support remote setting controller parameters.Such as Driver Chip type,the Controller Serial Number,Program Fragment,Play Speed/Jump frame frequency,LED Brightness and On/Off time .

5,Support SD card to store animation data, convenient and quick.

6,Program fragments can be set up independently year, month, day and week .Playing regularly.

7,Support DMX512 agreement, 2 channel outputs .

8,Support the addressing function of MR-DMX05,DMX512AP,UCS512 DMX512 Chips and so on.

9,A variety of drive chip control integration, set up by the software to change the chip type, the clock frequency, duty ratio, the gray level and other parameters.

10,Support the synchronization of controllers.

11,Support the dc or ac power supply .

12,Time to lock encryption function.

13,Optical module application for environment/audio light control .Interactive convenient to adjust the brightness of lamps.

14,Support the standard USITT DMX512/1990 general and extension agreements.Such as DMX512,DMX512AP,UCS512,MY7221.

Specification of 2CH DMX512 Master Controller:

Images of 2CH DMX512 Master Controller:

Size of 2CH DMX512 Master Controller:

Remote Setting of 2CH DMX512 Master Controller:

Application of 2CH DMX512 Master Controller:

When DMX340 was used for sync-lines application ,we can set up the No.1 controller to realize the synchronization control the subsequent controller .Such as program fragment selection,speed adjustment and so on .

Controller using ac power supply(AC12V)

Notice :

1,In DMX340 lighting control system:

when using in synchronization application ,we need to notice the only one controller ID=1 we can set .In general ,No.1 controller is located in the first one of all cascaded controllers .

2,The application range of the time switch of relay in general to use only one DMX340 for project.Standard products without this features.

RFQ :

1,The LCD of controller shows the PLAY00X,but press-button doesn’t work.

Re:The SD card of controller hasn’t been formatted to FAT32 or SD card problems .

Usually can exchange the SD Card to deal with these problems.

2,Under the way of sync-line synchronously,a series of controllers behind No,2 one can’t save the parameters .

Re:Sync-line synchronously is subject to a No. 1 controller .Otherwise, more controllers won't be able to synchronization, so if you want to adjust the parameters such as speed, please adjust the Numbers for 1 of the controller.

3,Under the way of sync-line synchronously,the time setting of more DMX340 controllers can’t be set up the same .Whether it will have an influence on the synchronization ?

Re:In this situation,the controller to read is the first time information,other time is not effective, so will not affect the synchronization.