High Quality Home Theatre 4k 150m Hdmi Extender Over Ip Support Mouse And Keyboard

1.Product Introduction

 

The 150m 4K HDMI IP extender can transmit 4K HDMI high-definition video from your DVD, player, PC and other devices by CAT5E / 6 cable, the max distance up to 150 meters and support 4Kx2K@30Hz.

It's convenient to transmit HDMI audio and video source by point-to-point mode, one point-to-many point and cascade connection mode . It can be used in conference rooms, squares, stations and so on.

 

Ø 2 Features:

Ø Support HDMI 1.4b

Ø Support point-to-point mode, one point-to-multi point mode and cascade connection mode

Ø Support mouse and keyboard

Ø Support unidirectional IR extension

Ø Support the max resolution 3840×2160/30HZ

Ø Lossless video compression, support HD display

Ø Video latency time<100us

Ø Pure hardware design, plug and play, no need to install additional software.

 

 

Specifications:                                    

HDMI Version…………………………………………………..………………..…...HDMI 1.4b

HDMI Resolution………………………………..……….……………..Up to 3840x2160/30Hz

Support video format ………………………………..…………………8/10/12 bit deep color

Audio format……………………………………………………….. …stereo、7.1CH

The max working current……………… ………………………………TX 420mA,RX  480mA

Dimension(L-W-H)….;…………………………………………………124×85×24(mm)

Weight………………………………………………………………………...TX: 204g,RX:207g

Power adapter format……Input AC (50HZ, 60HZ) 100V-240V; output: DC5V/1A

Working temperature / humidity………0℃ ~55℃  / 10% - 80%RH((No condensation))

Storage temperature / humidity………-10℃ ~ 75℃  / 5% - 90%RH(No comdensation)

 

 

3.Package contents : 

Ø 1pc x HDMI Transmitter

Ø 1pc x HDMI Receiver

Ø 2pcs x 5V/1A Power adapters 

Ø 1pair x IR cable

Ø USB cable male to male 1.5m/pcs

Ø USER Manual

 

4. Interface description

HDMI Extender TX

5.Connection and operation

1) Connect the HDMI source (such as DVD, PS3, STB ) to the "HDMI IN" of transmitter by HDMI cable. 

2) Connect the "HDMI out" of Receiver to HDTV display by HDMI cable.

3 )Use one Cat5e/6 (recommend) cable up to 150meters to connect the Sender and Receiver.

4) Connect the "IR receiver cable"into "IR-RX" port on receiver, and "IR transmitter cable " into the "IR-TX" on transmitter.

5)If need KVM function, connect the mouse and keyboard to USB1' and USB 2'ports.

6) Connect two pieces of 5V power supply to the transmitter and receiver, power supply for the device and the LED indicator light on. When status lamp on and flash slowly, the device start to work properly.

Noted:1. When everything is connect well and turn on the TV, after start RX (TV screen show 'wait Link Up') long time press (above 3s) EDID button until TV screen blackening then loosening button,EDID update successfully.

       

2. When there is a normal picture on the TV,press the USB button of the RX,the screen shows 'USB owner' to indicate that the USB 1 / USB 2 has been turned on, the mouse and keyboard can be used normally.

Point to multipoint application

Noted:1. When everything is connect well and turn on the TV, after start RX (TV screen show 'wait Link Up') long time press (above 3s) EDID button until TV screen blackening then loosening button,EDID update successfully.

 

2. When there is a normal picture on the TV press the USB button of the RX,the screen shows 'USB owner' to indicate that the USB 1 / USB 2 has been turned on, the mouse and keyboard can be used normally.

 

     3. Please use a dedicated gigabit ethernet network swith for point to multi-point function.