Feeding material | PPGl/aluminum/glgl |
Thickness of the plate | 0.3--0.8mm |
Diameter of the axle | 80mm |
Rolling stages | 14 stages |
Productivity | 8 16m/min |
Total power | 5.5kw machine motor + 4kw pump station motor |
Voltage | 220V 60Hz 3phase or as requirement |
Base frame | 350H steel |
Side board thickness | 16mm |
Cutting blade | Cr12 with heat treatment |
Cutting system | Hydraulic cuting system afer forming |
Control cabinet | PLC and frequency changer in it |
No. | Name | Unit | Qty |
1 | Manual decoiler | set | 1 |
2 | Main forming machine | set | 1 |
3 | PLC control system | Set | 1 |
4 | Hydraulic pump station | set | 1 |
5 | post cut | set | 1 |
6 | electric motor | set | 1 |
7 | output table | set | 1 |