Features:
we draw into foreign advanced coating machine technology and together with our own many years of experience .it adopt comma blade
blade and gravure roller two kind coating method, it widely used in the production of non-drying adhesive sticker etc.
Spec.
1 overall machine adopt 5frequency motor control
2 electrical rotation double station unwinding frame, adopt magnetic powder auto control the tension
3 comma blade roller clutch adjustment adopt pneumatic swing arm type, swing arm with fine adjust device control, glue quantity
thickness by feeler gauge control
4 gravure coating method, coating blade shaft adopt heavy double shaft type machine independently moving, blade adjust by manual
with pneumatic type, angle is adjusted freely, coating quantity is depend on the gravure roller mesh, different coating quantity
can change different mesh gravure roller.
5 oven:10m for 4section independently control, heating adopt electric, hot air intake type drying system, adjustable inner cycle
air intake and out device, air intake and out with strong air , dry thoroughly
6 oven inner guide wheel is active synchronous with the mainframe, drive adopt synchronous belt drive guide wheel to assure
synchronous to reduce material stretch and deformation, cylinder pneumatic open oven and film pass operation panel so that worker
can work very easily.
7 the tension between coaitng roller and traction steel roller adopt float swing arm
8 auto-length and speed meter device
9 webguide adopt EPC air sensitive register to assure the trimness when rewinding
10 rewinding and unwinding adopt key type airshaft for easily operate when loading and unloading the material
11 high presicion up press traction device, steel roller cooling adopt water cycle to make the film surface more smooth and neat.
to reach good cooling effect.
12 rewinding frame is hydraulic lift type single station, rewinding adopt frequency motor, vector inverter control.
Remark.
A According to the different requirements of the customers special the customized machine (limited width of 300-2000mm)
B rewinding and unwinding frame : manual lift up type single station, hydraulic lift type single station, electrical rotation
double station, electrical chain climbing type double station, electrical rotation wheel pan type double station can be choosed by
customer
C oven heating method: electric heating, conduction oil heating, steam heating etc can be choosed by customer
D coating method: gravure roller coating, double rollers coating, three rollers coating, five rollers coating, comma blade
coating, air knife coating etc can be choosed by customer
E work speed is proportion with coating material quality, coating thickness, oven length, drying temperature
Technological process.
Unwinding-coating unit- drying unit-traction unit-rewinder