Application:: Developing World Water Solutions, Irrigation and Agriculture, Mining industry, Washing and Cleaning, wastewater treatment, Water Distribution, Water Treatment Solutions

Horsepower:: 25-155hp

Power Source:: Electric

Pressure:: Depending on the model

Structure:: Single-stage Pump

Cable Length:: 10-48m

Voltage:: 380/220V or customer request

Power:: 18.5-115kw

Product name:: vertical Slurry Pump

Warranty:: 12 Months

Material:: Cr27/Rubber

Type:: Horizontal Centrifugal Pump

Flow rate:: 126-648m3/h

feature:: Corrosion Resistant, Anti-abrasive

Speed:: 500-1000rpm

Model:: SP series

Function:: Slurry Transmission

max particle size:: 104mm

Certification:: ce

Supply Ability

Supply Ability:: 1000 Set/Sets per Month

Packaging & Delivery

Product Introduction

High Quality Chemical Resistant Rubber Lining Centrifugal Vertical Sump Lime Slurry Pump from China supplier

Vertical slurry pump has been designed to work over sumps and pits to transfer abrasive large particles and high density slurries.Being of cantilevered design, they do not require a shaft seal or water flush and can be run dry for long periods with no damage to pump components.

The assembly is grease lubricated and sealed by labyrinths; the upper is grease purged and the lower protected by a special flinger. The upper or drive end bearing is a parallel roller type whilst the lower bearing is a double taper roller with preset end float. This high performance bearing arrangement and robust shaft eliminates the need for a lower submerged bearing.

√ Casing – Has a simple bolt-on attachment to the base of the column. It is manufactured from a wear resistant alloy for the SP and from molded elastomer for the SPR. √ Impeller – Double suction impellers (top and bottom entry) induce low axial bearing loads and have heavy deep vanes for maximum wear resistance and for handling large solids. Wear resistant alloys, polyurethane and molded elastomer impellers are interchangeable. √ Lower Strainer – Bolted metal or polyurethane for SP; molded snap-on elastomer for SPR. √ Discharge Pipe – Metal for SP; elastomer covered for SPR. All wetted metal parts are completely rust protected.

Model	Max. Power(kw)	Material	Flow(L/S)	Head(m)	Speed(r/min)	Impeller Diameter(mm)
SP
40PV	15	Cr27	5-12	4-28	1000-2200	188
65QV	30			6-24	5-31	700-1500	280
100RV	75			15-80	5-35	500-1200	370
150SV	110			30-130	8-40	500-1000	450
SPR
40PV	15	Rubber	5-11	4-26	1000-2200	188
65QV	30			6-29	5-30	700-1500	280
100RV	75			18-80	5-35	600-1200	370
150SV	110			30-130	8-40	500-1000	450

Packing & Delivery

●Ways Of Packing

1.Small parts packed in the wooden cases.

2.Big parts packed by plastic membrane.
3.The whole big machine is loaded in the container.

● Shiping by sea/air freight

or any way the customer requires.

Our Company

1.Inquiry and consulting support. 2.Ore sample testing support. 3.View our Factory. 4.Design Flowchart.

1.Training how to instal the machine, training how to use the machine. 2. 1 year warranty . 3.Engineers available to service machinery overseas.

FAQ

1.How is the quality of your products?(mining equipment/machine)
Answer: Our products are manufactured strictly according to national and international standard, and we will do a test on every machine before delivery.

2.Guaranteed?
Answer: All of our products are guaranteed for one year. If products quality is not consistent with the description or promise we made before you place order, we promise 100% refund.

3.How about price?
Answer: For the complete same machine, we can promise our quality is the best when the price same as other competitors, and our price can be lowest when the quality at standard level.

4.Service and Payment Terms?
Answer: We can accept T/T and L/C; 30% deposit, 70% balance before factory delivery, which is international trade practice; Finished product pictures will be provided to customers before delivery.

Contacts
If you are interested in our products, please don't hesitate to contact us. Could you tell me the following questions, so that I can give you a complete solution, including best Exw-works Price Quotation!
1. Which machine do you need? like gold washing machine, spiral chute, vibrating screen, Jig separator, Shaking table, etc.
2. What is your raw ore that you plan to process? like gold ore, diamond ore, tantalite or silica sand, etc.
3. What is the capacity you need? Like 10 tones per hour.
4. What is the feeding size to the machine? and what is the discharging-material size that you require?

Sincerely welcome to send your inquiry,you can get best quotation and professional service.

No desirable products?

Sourcing assistant>

How to start your business

Step 1
Find your interested products by search keywords
Step 2
Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
Step 3
After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
Step 4
Set up meeting with the Chinese supplier without language barrier

Send Enquiry

To: Lily Liu

Meorient Import & Export Co.LTD

Enquire