High Quality Brushed Texture Home Theatre LCD Display HI-FI Bluetooth Speaker Mobile Phone Charger Usb Wireless Oem stereo sound

Call& answer operation Step 1: Call BT mode,press and holds the PAUSE/PLAY key>0.5s, It will be back to dial the last phone number your before dialed. And press and hold the PAUSE/PLAY key will hang-up the call when calling is processing. Step 2:Answer the call BT mode,the call is incoming, simply press and release the "Answer the call" key one time,the call will be connected and talking can begin,then press and release the "Answer the call" key again, hang-up call. TF CARD PLAY Insert TF card into the TF card slot,then you will hear the speaker's voice prompt "TF card play".The speaker will automatically read the track files in TF card and play.User can use the speaker's tself keys to control music play. AUX PLAY MODE Insert the 3.5mm Audio cable into the AUX in jack located on the bottom of the BT speaker,then connect the other end of the 3.5mm Audio Cable to your audio playing source device,there will be a "AUX audio play" voice prompt,then the speaker will automatically change to AUX PLAY MODE. The speaker can normally playback external audio source device's audio information. Tips: You can control the volume up and down by the NEXT and PREVIOUS keys at the speaker base,by PAUSE/PLAY key to control mute. FM RADIO MODE Enter FM radio mode: Press and release "M" key to switch the mode to FM radio mode,when you heard the voice prompt "FM play", the speaker will appear radio searching station noise,It means that the speaker already entered the FM radio mode. FM radio opeartion: In FM radio mode, press and hold PAUSE/PLAY key,the speaker will enter fully automatically channel search mode. When channel searching is complete, the first channel be searched will be kept at the first channel, and others channels will be saved and memorized in the FM memory system.If you want switch the channels please operate the NEXT and PREVIOUS keys,The channels searching time depends on local radio signal strength. NFC CONNECTION 1).This function is only applicable to NFC mobile devices, some mobile devices factory installed NFC software and some not,so you need to download the NFC software on the computer and then activate it.Due to the mobile devices manufacturer NFC installation position is different, please make sure that the mobile device's NFC signal when using NFC function. 2).Place mobile device vertically stick on the speaker base NFC mark for NFC pairing.When mobile device has its system prompt.then you can playback the track files from your mobile device by the speaker. 3).If you need to close the NFC function,please place your mobile device again vertically stick on the speaker base NFC mark,the NFC connection will be shut off automatically.