Heating Temperature: 2500℃
Can be used to hardening, tempering, annealing, welding, melting, forging etc.
This machine has special requirement for cooling water, please pay attention to this.
IGBT Gear Shaft Induction Tempering Annealing Quenching Hardening Heat Treatment Machine
Main characteristics
Technical Parameters
Model | JL-60 | |
Input power desire | 3 phase 380V 50/60HZ | |
Oscillate power max | 60KW | |
Max input current | 80A | |
Oscillate frequency | 30-100KHZ | |
Cooling water desire | 0.3Mpa ≥6L/MIN ≤40°C | |
Duty cycle | 100% | |
Dimensions (L*W*H) |
Generator | 640*350*610mm |
Transformer | 470*290*460mm | |
Net weight | 50kg/30kg | |
Cable length | 2-6(Meters) |
IGBT Gear Shaft Induction Tempering Annealing Quenching Hardening Heat Treatment Mach
Machine Photo
Front Panel
Our Induction Heating Machine with multi-protective functions to over-voltage, over-current, over-temperature, water fail, phase fail and is safe and reliable.
Lower power consumption, the IGBT technology save 15-30% energy, 100% full load, working 24 hours continuously.
Working Photo
Main Parts Introduction
Application Showcase
PS: Induction hardening is a form of heat treatment in which a metal part is heated by induction heating and then quenched, increase the hardness and brittleness of the part. Induction hardening equipment is widely used for the surface hardening of steel.
High Frequency Series (30-100KHZ)
Model | JL-5 | JL-15 | JL-25 | JL-30 | JL-40 | JL-50 | JL-60 | JL-80 | |||
Input power desire | Single phase 220V 50/60HZ | 3 phase 380V 50/60HZ | |||||||||
Oscillate power max | 5KW | 15KW | 25KW | 30KW | 40KW | 50KW | 60KW | 80KW | |||
Max input current | 20A | 37A | 24A | 38A | 48A | 65A | 80A | 105A | |||
Oscillate frequency | 100-250KHZ | 30-100KHZ | 30-80KHZ | ||||||||
Cooling water desire | >0.2MPa 2-6L/Min | 0.3Mpa≥6L/MIN | |||||||||
Duty cycle | 100% 40°C | ||||||||||
Net weight | 19kg | 21kg | 28kg | 25kg/23kg | 35kg/30kg | 45kg/30kg | 50kg/30kg | 80kg/85kg |