High Quality 3.5Ton Forklift Truck Diesel Forklift 3 Tons
Max Xu
Tel / Whatsapp / Wechat: +8615728042560
Reliability Improved
Aluminous plate-fin radiator, hot wind backflow preventing baffle, optimized counterweight cooling channel improve the truck`s cooling ability;
The optimal design of key parts like frame, mast, overhead guard and steering axle improving the whole truck’s safety and reliability;
The reasonable whole truck’s gravity center improves loading capacity, more stability and safer;
The truck which applying casted steering axle with huge steering angle could decrease steering radius. The axle is both water and dust proof, reliable, and extends maintenance interval.
Maintainability
External installed transmission box filter and hydraulic return oil filter, improves repairing, cleaning and replacement efficiency. Change easily;
It is easily for checking and maintenance with enlarged engine hood opening angle.
H3 Series 2-3.5t CNG counterbalanced forklift trucks
This kind of truck possesses more advantages than other trucks of H3 series:
Good fuel-economy (Higher fuel efficiency):
The fuel cost of truck with CNG engine is 40% less than diesel engine or 60%~70% less than gasoline engine under normal working condition;(Concrete date changes with the price difference of fuel at different place).
Lower pollution:
There is less HC hybrid and CO than trucks with diesel engine in the exhaust gas emission, and no Sox, Pb, carbonaceous particular nearly. Improve the quality of the air.
Lower/ less noise and vibration:
Sound power, sound around the ears and vibration of the CNG truck are sharply decreased than the diesel truck, and the comfort of operation is improved observably.
Good low-temperature startup performance:
The lowest startup temperature:-30°C.
Reliable fuel system:
Gas cylinder is produced by domestic famous brands; the regulator of gas pressure is designed only for engineering vehicle by famous company of USA, meeting to UL authentication.
Diesel Forklift |
||||
Features |
||||
1.01 |
Manufacturer |
HELI |
||
1.02 |
Model |
CPCD30 |
||
1.03 |
Power type |
|
Diesel |
|
1.04 |
Load Capacity |
kg |
3000 |
|
1.05 |
Load Center |
mm |
500 |
|
1.06 |
Driving mode |
Sit-on type |
||
dimension |
||||
2.01 |
Max.Lifting height |
mm |
3000 |
|
2.02 |
Mast height,lowered |
mm |
2070 |
|
2.03 |
Max.fork lifting height(with backrest) |
mm |
4262 |
|
2.04 |
Free lifting height |
mm |
160 |
|
2.05 |
Overhead guard height |
mm |
2090 |
|
2.06 |
Min.Ground clearance(from bottom of mast) |
mm |
135 |
|
2.07 |
Overhead guard clearance(from face of seat) |
mm |
1000 |
|
2.08 |
Traction pin center height |
mm |
310 |
|
2.09 |
Backrest height |
mm |
1227 |
|
2.10 |
Overall length(with fork) |
mm |
3752 |
|
2.11 |
Overall length(without fork) |
mm |
2682 |
|
2.12 |
Wheelbase |
mm |
1700 |
|
2.13 |
Front overhang |
mm |
479 |
|
2.14 |
Rear overhang |
mm |
495 |
|
2.15 |
Overall Width |
mm |
1225 |
|
2.16 |
Front tread |
mm |
1000 |
|
2.17 |
Rear tread |
mm |
970 |
|
2.18 |
Fork Adjustment(Max/Min) |
mm |
1060/250 |
|
2.19 |
Min.turning radius(external) |
mm |
2400 |
|
2.20 |
Min.turning radius(internal) |
mm |
200 |
|
2.21 |
Min.Right angle stacking aisle width |
mm |
2380 |
|
2.22 |
Mast tilt,front/rear |
° |
6/12 |
|
2.23 |
Fork size(T*L*W) |
mm |
45*1070*125 |
|
Speed |
||||
3.01 |
Max.travelling speed(loaded/unloaded) |
Km/h |
19/19 |
|
3.02 |
Lifting speed(loaded/unloaded) |
Mm/s |
455/480 |
|
3.03 |
Lowering speed(loaded/unloaded) |
Mm/s |
450/500 |
|
3.04 |
Max Draw bar(loaded) |
kN |
17.5/13.4 |
|
3.05 |
Max.Grade ability(loaded/unloaded) |
% |
21/20 |
|
Weight |
||||
4.01 |
Total weight(oil included) |
kg |
4300 |
|
4.02 |
Load ability(loaded) front/rear |
kg |
6420/880 |
|
4.03 |
Load ability(unloaded) front/rear |
kg |
1710/2590 |
|
Tire |
||||
5.01 |
Tire No. X= Drive wheel(front/rear) |
|
2x/2 |
|
5.02 |
Tire type(front/rear) |
|
Pneumatic tire |
|
5.03 |
Tire size (front) |
|
28*9-15-14PR |
|
5.04 |
Tire size (rear) |
|
6.50-10-10PR |
|
5.05 |
Service brake |
|
Hydraulic-pedal |
|
5.06 |
Parking brake |
|
Mechanical-hand |
|
Dive Transmission devices |
||||
6.01 |
Battery(voltage/capactiy) |
V/Ah |
12/80 |
|
6.02 |
Engine Manufacturer/Model |
|
Quanchai 4C2-50V32 |
|
6.03 |
Engine Type |
|
DIESEL |
|
6.04 |
Rated power/rotational speed |
Kw/rpm |
36.8/2500 |
|
6.05 |
Max.torque/rotational speed |
Nm/rpm |
157/1800 |
|
6.06 |
Cylinder Number. |
|
4-90*105 |
|
6.07 |
Engine displacement |
L |
2.67 |
|
6.08 |
Oil Tank Capacity |
L |
60 |
|
6.09 |
Transmission type |
|
power shift |
CONTACT US
Max Xu
Tel / Whatsapp / Wechat: +8615728042560