High Quality 220V Single Phase Dc 1.5Kw Ac Frequency Inverter Drive Motor Speed Control
Introduction
The CDI-E102-series inverter is a classic-type low-power inverter with optimum SVC and V/F control, stable performance and simplified functions. It reserves the configuration most-frequently used by users, and is morecost-effective.
Technical Characteristics
1.Simplified Functions and More Cost-effective
Optimized configuration according to the functions most-frequently used by users, so as to reduce resource waste, improve cost performance and competitiveness.
2.Compact Structure
Optimum structure and elegant appearance; can be installed through both slides and holes; easy to use.
3.Flexible Type Selection
The 15kW or below types have standard internal brake units, and the 18.5-22kW types can have optional internal brake units. The 11kW, 15 kW types have standard DC inductors, and 18.5-22kW types can have optional DC inductors
Applications
Mainly applies to low-power non-VC situations with demanding requirements for input/output.
Die-cutting machine, carving machine, textile machine, glass-making machine and dyeing machine.
Accessories
External keyboard, extension cord, E102-485 communication expansion card.
E102 Series Inverter Technical Standard
item | specifications | |||||||
Control | Control Mode | V/F control Open-loop Vector Control (SVC) Vector Control (VC) (Not applicable to E100/E102/EM60 series) | ||||||
Frequency Precision | Digital: 0.02% Analog: 0.1% | |||||||
V/F Curve | Linear, square root, any V/F | |||||||
Overload Capacity | G-type: 150% rated current for 60s; 180% rated current for 3s P-type: 120% rated current for 60s; 150% rated current for 3s | |||||||
Start Torque | G-type: 0.5Hz/150% (SVC); 0Hz/180% (VC) | |||||||
Speed Adjustment Range | 1:100 (SVC) 1:1000 (VC) | |||||||
Steady Speed Precision | 0.5% (SVC) 0.02% (VC) | |||||||
Torque Precision | 5% (VC) | |||||||
Torque Compensation | Manual torque compensation (0.10%-30.0%); Automatic torque compensation | |||||||
Operating Mode | Key-board, terminal, RS485 communication | |||||||
Basic Type Function | Frequency Source | 14 main sources, 14 auxiliary sources. Easy switch between different modes. Diversified input modes for every source: keyboard potentiometer, external analog, digital setting, pulse frequency, multi-speed, simple PLC, communication, computing results, etc. | ||||||
Torque Source | 14 torque sources, including digital setting, external analog, pulse setting, multi-order, communication, computing results, etc. | |||||||
Acceleration and Deceleration Time | 4 groups of lines (can be switched through the option terminals); S Curve 1, S Curve 2 | |||||||
Emergency Stop | Interrupt the output instantaneously | |||||||
Multi-speed | 16-shift speeds at most; can be switched by different combination of order terminals | |||||||
Simple PLC | Continuous operation of 16-shift speeds; the acceleration/deceleration time, operating time and frequency source for every shift can be set separately | |||||||
Inching Control | Inching frequency and inching acceleration/deceleration time can be set separately; Inching can be prioritized in process. | |||||||
Rotating-speed Track | Track the start speed and operating speed of the inverter’s load | |||||||
Length and Distance Control | Length and distance control through pulse inputs | |||||||
Counting | Counting through pulse inputs | |||||||
Swing Frequency | For winding machines in the textile industry | |||||||
Internal PID | Closed-loop process control system is available | |||||||
AVR | Ensure constant output in case of fluctuating grid voltage | |||||||
DC Brake | Quick and stable parking is available | |||||||
Slip Compensation | Compensate the slip deviation due to increased load | |||||||
Hopping Frequency | Prevent resonance with the load | |||||||
Droop Function | Balance the load rate of different motors which drive the same load | |||||||
Timing | Automatic stop at a given time |
E102 Series Inverter Model Selection