Model | A-10 |
---|---|
Specification | A13mm*B100mm*C10mm |
Injection method statement
1.Identify the crack.
2.Drill the hole 5 to 10 cm away from the crack at 45 toward the crack.
3.Clean the hole properly.
4.Insert the packer.
5.Fix and tight the packer.
6.Connect the pump to the packer and start injecting.
7.After injection material is totally dry remove the packer.
Application Places
Subway, tunnels, culverts, sewage treatment pond, basements, underground garage, underground passage, roof concrete slab cracks, wall pipe, wall, the water leakage cracks in concrete, concrete structure, beam, column, slab cracks etc with high pressure grouting injecting epoxy resin.
Specification
Injection packer |
length*diameter |
JBY100 |
13mm*100mm |
Characteristics
1. The injection packer is with strict quality control.
2. It is widely used in building construction, concrete crack and water leaking stop.
3. Long size injection packer is used on lose structure; short size on compact structure.
4. It suits for polyurethane resin and epoxy resin.
Injection Method Statement
1. Identify the crack.
2. Drill the holes 5 to 10 cm away from the crack at 45 toward the crack.
3.Clean the hole properly.
4. Insert the packer.
5. Fix and tight the packer.
6. Connect the pump to the packer and start injecting.
7. After injection material is totally dry remove the packer.