High Precision Drive Shaft Dynamic Balancing Machines for Car
High Precision Drive Shaft Dynamic Balancing Machines for Car
Production Parameters
Workpiece quality range (including fixture) | 5~100 kg |
Maximum shaft diameter of the workpiece | ≤Φ130 mm(The maximum diameter of the intermediate support frame is Φ100mm) |
Maximum length of the workpiece | ≤2400mm |
Rotor speed range (stepless speed regulation when frequency conversion) | ≤3200r/min 4800r/min(Only for short-term speed test speed) Remarks: The measuring speed can be increased to 5000r/min according to user requirements. |
Motor Power | 3 kW |
Maximum initial imbalance | ≤500 gcm |
Minimum reachable residual imbalance | 5 gcm |
Measuring surface | 3 planes |
Production Details
INTRODUCTION:
This series of equipment is a special equipment for correcting the imbalance of the drive shaft of the car, which can correct the imbalance of the two drive shafts at the same time. The positioning lock or release after the movement of the middle and right support frames and the lifting and lowering of the safety frame lever are pneumatically controlled. The machine has advanced technology, high efficiency, simple operation, intuitive display, rapid measurement and good stability.
The equipment of this series can be correctly adjusted according to the radius of the two calibration faces of the rotor before starting, and the unbalance amount and phase of the workpiece can be correctly displayed under one start. The HW310 new generation special electrical measurement system matched with this machine is based on the PLC platform. The measurement is stable, the function is complete, the touch screen operation is possible, and the human-machine dialogue function is powerful.
This series of equipment can be equipped with a projection welding machine to meet the welding of the balance plate and the shaft tube when the drive shaft is calibrated, reducing the operator's working load and improving production efficiency. The balancing machine and the projection welding machine have interlock protection devices. The projection welding machine adopts microcomputer control, with large parameter setting range, high control precision, stable performance and compensation function for the power grid.
Configuration instructions:
1. In the form of soft support, the whole mechanical system has sufficient support rigidity, the support frame is moved by the hand wheel, pneumatically locked, and interlocked with the main shaft.
2. Equipped with the variable frequency speed control system to achieve stepless speed regulation.
3. Equipped with the automatic parking system. After the signal acquisition of the electrical measurement system is completed, it will automatically stop and output the measurement results.
4. Optional manual / automatic positioning function.
5. Optional projection welding machine to complete the welding action of the balance piece and the shaft tube. The projection welding machine and the balancing machine have interlocking linkage protection devices, and the projection welding machine can move left and right along the pipe fittings.
6. Optional shaft tube runout detection function.
Advantage
- Compact
- High level of flexibility
- High measuring precision
- High balancing precision
- Quick changeover
- User friendly
Ambient parameters
The equipment can be used continually and normally in 72 hours under below condition.
1,Working temperature:- 5℃~45℃
2,Humidity: 83~95%RH(+40℃),68~74%RH(-15℃)
Why Balancing?
1) Balancing creates and enhances quality!
Unless it is corrected, the effect of unbalance will often only become noticeable in the finished product. If rotors are not balanced, they can cause undesired or even dangerous vibrations. They can also diminish the practical value of a machine, causing damage to the bearing, or fractures to the casing, suspension or foundation. Excessive noise and vibration may also irritate or annoy the user and lead them to conclude that the product is of poor quality. Thus, a product that is free from noise and vibration is always a sign of quality, precision and craftsmanship.
2) Increasing Demands!
More sophisticated technical development have lead to constantly increasing requirements with regard to balancing quality. Higher performance for applications such as high-speed tool spindles, electric motors, turbines, fans, universal joint shafts or paper rolls simply mean higher speed. The trend is clear, and in order to meet these requirements precision balancing is essential. Accurately balanced rotors allow us to safely reach higher speeds and deliver considerably higher performance.
Hangzhou Jizhi Mechatronic Co.,Ltd, located in Hangzhou, Zhejiang Province, east part of China. The porpular cultural and historical touring city, which successfully held the summit G2O in 2016 and the headquater location of many IT leading companies such as Alibaba. JIZHI was established in 2004, an professional and the only listed manufacturer of balancing machine in China Martket, specializing in R&D of dynamic balancing field for more than 10 years. As one of the national industry standard drafter unit, Jizhi has possessed own intellectual property rights and patent technology. In 2016, Jizhi successfully IPO and turned a new page for the company. The main customers come from the industry leaders such as Bosch, Valeo, Mitsubishi, Mabuchi Motor, Honeywell, Stanley, Mahle, Samsung, Hitachi, Sampo etc. Hope more hands can be held together with us to balance this rotary world. Where there's a rotation, where there's JIZHI.
Jizhi has the following affiliated companies
Shanghai Hengwang Intelligent Technology Co., Ltd
Hangzhou Hehui Intelligent Equipment Co., Ltd
Guangdong Jijie Intelligent Co., Ltd
In the international market, Jizhi is the only listed motor manufacturer of balancing machines in China.
JIZHI---Where there's a rotation, where there's JIZHI.
Company Information
Factory picture
Certification
Customerized service
1. Customized product design and manufacturing
2. Customized tranning
3.Technical suggestions
After-sales service
1. Warranty Period: 12 month
2. Indian office and India engineers are available.
3. Engineers and trained operators are available to service oversea.
1.Q: How to confirm which balancing machine moedel is finest for my use?
1. Find which industry you or your company belongs to.
2. Compare your worlcpteces with we provide in the product page.
3. Ensure the power supply voltage and phase.
4. If you don't know the rotor's specific, leave message or send inquiry for us, and then we will guide you immediately.
2.Q:How long of the machine produce after conform the order and how to transport?
1.Small size: one week.
2.Medium size: one month
3.Generator motor: two months
4.Customized machinie: three months
5.By air or sea
3.Q:Do you sell balancing spare parts?
Yes, we do sell spare parts like sensor, stepped motor, belt, main board, fixture, PLC and any other applied in balancing machine.
4.Q: We have a balancing machine in use for many years. Would you provide balancing machine repaire retrofit and upgrade?
Yes, we can repaire, retrofit and upgrade. If you want to buy a new one, the old one can be be recycled for some money to buy the new one.
5.Q: I don't know how to operate balancing machine, is there any tutorals about operating balancing machine?
Yes, we have the trained oversea maintenance staff and some vedio. If you still do not know how to operator we can have a vedio meeting to instruct your operator.
Website: www.zjjizhi.com
Add.: No.1-1, Qixian Rd, Liangzhu Street, Yuhang District, Hangzhou, Zhejiang Prov. China, 311113
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier