Specification:
Model | BJI-2X |
Field of Vision | Φ50mm |
Imaging Resolution | 50lp/cm |
Maxi Objective Thickness | 280mm |
Screen Brightness | Applicable |
X-ray Tube Voltage/Current | 60kV/0.35mA |
X-ray Leakage | (50cm away from X ray tube, any angle)<1mGy/Hour |
Grey Scale | ≥6 |
Power Supply | 90-240V, 50 or 60Hz |
Power Consumption | 250VA |
Net Weight | 8kg |
Gross Weight | 13kg |
Size of Handheld Case | 66*53*22cm |
Export image from any monitor? | Observe from monitor or computer |
Specialization and application | Four limbs |
Notes:
1.Sterilize temperature ≤ 135 °C (Improved type ≤ 155 °C ),if the |
temperature is over 135 ° C ,the motor will be damaged. |
2.Normal bone drill can only hold drill bits less than 6mm,acetabulum |
reaming drill with big torque,rpm is around 300,canulate drill is used |
with nail or K wire ,rpm is around 600. |
3.The battery need to be get out of the pwer tool after surgery. Otherwise |
the small automatic discharge of the electric will make the life of the |
battery short. |
4.The battery cannot be sterilized ,it is not autoclavable. |
5.The cranial bur must be washed right after the surgery by purger in |
order to aviod the blood stick in the bur,then we should make it dry. |
6.The battery space in the handpiece of the tool should not have any |
water,after sterilization. |
7.The cranial bur blade is made of medical stainless steel,in order to |
avoid broken,so it is flexible and not very hard,it is easy to be attrite, |
we suggest each blade only use for 1 surgery. |