High Frequency Welding Argon Machine Generator AC DC TIG 200 Pulse S - Welder HF Inverter Arc Stick
Superiority:
1. 4 In 1 combination welding device - TIG Inverter with AC- and PULSE-Function, and manual metal arc stick welding (MMA).
2. Antistick - Prevents annealing of the electrode (less consumable electrodes), because the power is immediately terminated.
3. Hot Start - Automatic voltage increase at the start.
4. HF Ignition - High-frequency contactless ignition to the workpiece.
5. MMA - Manual metal arc welding.
6. CUT contact - Absolutely easy-to-use HF high-frequency contact ignition. A light stroke over the workpiece is sufficient.
7. Plasma Cutter - With the integrated Plasma Cutter 50 A can be cut without problems all conductive metals. For example: aluminum, steel, copper, brass, titanium and so on (depending on material).
8. Gas magnet valve - Opens only when the hand torch is operating and closes when the welding process is finished.
9. Over heat protection - When temperature of machine exceed the required standard, the welding machine will stop working automatically. A red indicator light turns on and turns off when the device is cooled down again.
10. Automatic cooling ventilators - Quickly cooling ventilator allows a exploitation of maximum power.
11. Highest efficiency for all requirements with reproducible welding results and excellent quality through the fully digital inverter welding technology.
12. Easy to understand operating concepts for each choice of particular setting, so you can concentrate fully on your welding task.
13. Through powerful TIG arc - Faster, better and easier welding across the entire power range.
Application
The welding equipment is particularly suitable when quality welds are extremely important. Private gardening: motorcycles, cars, trucks, classic cars, model making, stair and balcony railings; or in the professional and industrial sectors such as shipbuilding, metal, metalwork, aircraft, garden, landscaping and welding schools, the highest quality requirements are met successfully with our welding equipment.
Notice
1. Avoid welding in sunshine or drippings.
2. The working area is adequately ventilated!
3. Do not over load! No over voltage!
4. The welding machine has installed protection circuit of over voltage and current and heat. When voltage and output current and temperature of machine are exceeding the rate standard, welding machine will stop working automatical
Details:
Output current TIG |
10-200 A |
Output current MMA |
10-200 A |
Output current Plasma /CUT |
10-50 A |
Duty cycle TIG |
60% bei 200 A |
Duty cycle MMA / ARC |
60 % at 200 A |
Duty cycle Plasma /CUT |
60 % at 50 A |
Cutting thickness (material dependent) |
12 mm |
No-load voltage |
56 V |
Degree of protection by enclosure |
IP21 |
Insulation class |
F |
Mains voltage |
230 V AC (+-15%) / 1 ~ (single phase) |
Power frequency |
50/60 Hz |
Mains fuse (delay fuse) |
1 x 16 A |
Maximum input current |
27 A |
Maximum connection power |
6,2 kVA~ |
Recommended generator power |
> 7 kVA / 1 ~ |
Weight |
34.8 kg |
Package size Length x Width x Height |
72 x 60 x 45 cm(28 x 24 x 18 inch) |
Mains supply |
SchuKo-Type CEE 7/7 |
Norm |
IEC 60 974-1 ; CE |
Gas preflow time |
0 - 2 sec |
Gas post flow time |
0 - 10 sec |
Current reduction |
0 - 10 sec |
Power shift |
20 - 80% |
Arc rash TIG |
HF - ignition |
Power factor |
0.73 |
Welding strength |
10 mm |