Laser Leveling Machine Introduction
1. Reduce labor costs and double efficiency
There are a large number of people in the traditional process of construction, so it is necessary to support the formwork (channel steel), dot and pave. About 20 people are needed. The daily construction area is 2000 m2.
The laser leveling machine is used to reduce the total number of people to 4-8. It can be operated by one person. The daily construction area is increased to 3000-5000 m2. The labor cost is greatly reduced.zmwm07
2. Laser on the point, high accuracy, low error.
The traditional leveling technology needs formwork to control the ground elevation and control the line. The elevation error is large. The levelness and flatness of the whole floor cannot be guaranteed.
The laser point-to-point transmitter is suitable for large-area disposable paving. The laser measurement and control system controls the elevation in real time, the leveling is not required, and the side template is not needed to control the ground elevation. Thereby, the elevation error caused by the vibration of the template (channel steel) during the construction process is avoided, and the elevation error caused by the conventional manual block mode is also reduced.
3. Better flatness and integrity
Traditional technology construction, a day of formwork, a day of mercury, can only be a piece to jump construction, limitations, can not continue to work, and the integrity is not good, easy to cause construction joint cumulative error.
The laser leveling machine has a one-time overall paving for a large area of floor, which has higher efficiency and flatness. The completion of the entire floor makes the ground more integrated, which is not possible with traditional construction techniques.
4. The ground is more dense and even
4000 times per minute of high-frequency vibrator, so that the flat head vibrator produces uniform high-frequency vibration, making the concrete ground more dense and uniform.
Laser Leveling Machine Parameter
Four Wheel Concrete Laser Leveling Machine Technical Parameters |
|
||
Product Type |
Product Name |
Four Wheel Concrete Laser Leveling Machine |
Unit |
Product Model |
YZ25-4 |
|
|
Engine |
Model |
kohler CH940 |
|
Type |
Gasoline, air-cooled 4-stroke, twin-cylinder |
|
|
Power |
32.5 |
HP |
|
Lubricating oil quantity |
2.75 |
|
|
Fuel tank volume |
34 |
L |
|
Leveling system |
Leveling head method |
Fixed |
|
Leveling width |
2500 |
mm |
|
Paving method |
Auger paving |
|
|
Paving thickness |
60-300 |
|
|
Auger power |
Low speed high torque cycloidal hydraulic motor |
|
|
Vibration system control method |
Vibration motor |
|
|
Exciting force |
500 |
N |
|
Vibration frequency |
50 |
Hz |
|
Laser system |
Laser system control method |
Microcomputer laser scanning |
|
Laser system control effect |
Plane, slope, double slope (3D) |
|
|
Walking system |
Drive |
Reducer + motor |
|
Wheel |
Solid stab-resistant tire |
|
|
Speed |
0-85 |
m/min |
|
Operation mode |
Seat position |
Rear type |
|
Forward, backward |
Handle control, stepless speed change |
|
|
Turn |
Hydraulic power, steering wheel control |
|
|
Cleaning system |
Power |
External motor |
|
Theoretical flow |
20 |
L/min |
|
Rated pressure |
7 |
Mpa |
|
Size and weight |
Outline size |
3200*2915*1900 |
mm |
Weight |
1080 |
Kg |
Laser Leveling Machine Photos