High Capacity Bolts Joint Fiberglass GRP SMC Water Tank With Sealing Material
High Capacity Bolts Joint Fiberglass GRP SMC Water Tank With Sealing Material
SMC Water Tank Introduction
FRP water tank is made of fiberglass reinforced plastics which is divided in FRP Modular Type and SMC combination type. The major advantage is light weight, anti-rusted, non-leakage, long durable
time and easy to clean. It’s widely used in hotel, school, hospital and coal mine enterprise.
Internal Reinforced System
External Reinforced System
SMC Water Tank Panel Thickness
Tank Height | Thickness of each panel | |||||
bottom panel | 1st layer side panel | 2nd layer side panel | 3rd layer side panel | 4th layer side panel | cover panel | |
1m | 10mm | 10mm | / | / | / | 5mm |
2m | 12mm | 12mm | 10mm | / | / | 5mm |
3m | 16mm | 16mm | 12mm | 10mm | / | 5mm |
4m | 18mm | 18mm | 16mm | 12mm | 10mm | 5mm |
SMC Water Tank Physical and Chemical Properties
Item | Performance index |
Tensile strength,Mpa | ≥60 |
Bending strength,Mpa | ≥100 |
Bending modulus,Gpa | ≥7.0 |
Pap hardness | ≥60 |
Bibulous rate,% | ≤1.0 |
Glass fiber content,% | ≥25 |
SMC Water Tank Performance
Item | Requirements |
leakage | No leakage after filled with water |
Full of water deformation | Filled with water, wall maximum deformation after no more than 1.0% of the tank bottom center height, no more than 10 mm maximum deformation |
Water quality | Accord with GB5740 |
SMC Water Tank Advantages
1) Light weight, high strength
2) Leak-proof /Water Tightness: Due to the material is fiberglass reinforce plastic with high density, and the sealing tape is high performance with non toxic, so it's leak-proof tank;
3) Long lifetime, long durable time: the maximum distortion of the sidewall is less than 1 percent for the height; maximum distortion of the bottom center is less than 10mm. The normal durable lifetime is more than 30 years.
4) Corrosion resisting; anti-rusted
5) Easy to clean and maintenance management convenient, Drainage at the tank bottom can be cleaned easily and Manhole panel makes it easy to enter into the water tank inside.
6) Non-toxic, it is made from food grade resin, clean and no pollution. SMC Water Tanks satisfy relevant Food Sanitation standards. Since exterior light is completely blocked, bacteria generation and germ growths are prevented.
SMC Water Tank Applications
---Water storage(drinking water, rain water, sea water, irrigation water)
---National, provincial and state parks
---Construction and fire-fighting water supply
---Water circulation system
---Agricultural feeding operations
---Fishing and shrimp tank
---Temporary water storage tanks for expansion of heating system
---Widely usde in industry-mining-enterprises-public institution-resitaurants-reclainmed water disposal-fire controlling-other buildings.
SMC Water Tank Accessories
Internal accessories:
Inside ladder, flange, lacing wires, support, lacing wires board;
External accessories:
Outside ladder, fixing angle iron, auxiliary angle iron, rubber strip, plugging, silicon glue, bolts and nuts;
For FRP water tank accessories, usually have three specifications.
•Stainless steel 304/316;
•Hot dipped galvanized steel (HDG);
•Cold dipped galvanized steel (CDG);
FRP Panel
Lacing Wires
Reinforced Angle
SMC Water Tank Installation Step
Step 1. Install steel footings on leveled concrete foundations.
Step 2. Align GRP panels to be pre-assembled.
Step 3. Place rubber sealant from ready-to-use roll between panels.
Step 4. Connect panels with bolts and nuts.
Step 5. Position bottom panel sections, and finish up base of tank.
Step 6. Position three sides of the tank.
Step 7. Position and fix top panels and if required, top support pipes and plates.
Step 8. Install reinforcement if required.
Step 9. Close up the tank with the fourth side.
Step 10. Finish the internal or external reinforcement.
Step 11. Fill and test.
Cautions:
1. Please do not store water higher than 70 °c or other liquid (chemicals, oil and so on).
2. Keep away fire.
3. Prevent pollutants and plunges from outside.
4. Use soft apparatus to clean. As to the new water tank, clean twice before use.
SMC Water Tank Production Equipments
SMC Water Tank Packaging & Shipping
1. Any inquires will be replied within 8 working hours.
2. Professional FRP products manufacturer, welcome to visit our factory.
3. High quality, reasonable & competitive price.
4. Fast lead time, we are near Tianjin Port
5. Payment: we usual accept payment by T/T and western union.
6. We have strong cooperation with forwarder, you also can chose your own shipping forwarder.
Q: 1. Can I have a sample order?
A: Yes, sample is available. Mixed samples are acceptable.
Q: 2. What is the lead time?
A: Usually 7 days or according to quantity
Q: 3. What is the minimum order quantity?
A: Our MOQ is one set
Q: 4. What is the price policy of your company?
A: The price is different according to the order quantity , the more the cheaper.
For more detailed information, you can contact us freely
Q: 5. What is the package?
A: We offer pallets, wooden case, steel frame packaging, or according to customer's demand
Q: 6. Can I visit your company?
A: Welcome, look forward to your arrival and we will pick up you from Beijing airport and lead you to visit our factory
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier