DRO D100 Technical Parameter Sheet | |||
Resolution | 0.1μm/0.2μm/0.5μm/1μm/2μm/2.5μm/5μm/10μm (to be chosen) | ||
Display Screen | LED | ||
Display Case Size | 300X180X75mm | ||
Axis | 1 | 2 | 3 |
Signal | TTL/RS422 | ||
Input frequency | <5MHZ | ||
Voltage range | AC 80~260V (50~60HZ) | ||
Power Dissipation | 15W | ||
Working temperature | '-10~60℃ | ||
Operating keyboard | Membrane Keys | ||
Material of Case | Plastic | ||
Application Suggested | Particular for Milling, Lathe, Grinding, EDM |
Magnetic scale :
DM Series Linear Scale Technical Parameter Sheet | ||
Type | DMS | DMA |
Resolution (μm) | 0.5/5/10/25μm | |
Accuracy (μm) | ±10/±15/±30μm (L<1m; 20℃) | |
Measure Length (mm) | 50mm~32000mm | |
Cable Length | 1/2/3mm | |
Poles Pitch (μm) | 1+1 / 2+2 / 5+5 mm | |
Air gap btw head and tape | 0.5/1/2.5mm | |
Working Temperature | -10℃~80℃ | |
Protection Level | IP67 | |
Housing Cross Section (mm) | 33X20 | 31.5X28 |
Housing Structure | Open | Open |
Max. Response Speed (m/min) | 240 | |
Protection Level | IP67 | |
Output Signal | TTL / RS422 | |
Input Voltage | LINE-DRIVE; PUSH-PULL | |
Cable Length | 3M/5M (Can customized ) | |
Plug Model | DIN-7/DB-9 (Can customized ) | |
Feature : | ||
1:Match IP67 protection degree | ||
2:Automatic gain control technics ,reduce the requirement for installation.The gap between the reader and tape can be 3mm (5micron ) | ||
3:Protection of the anti-pole of the power and wrong wire connection (voltage<5.5V) |
Function List
Basic Functions | Zeroing, Data Recovery | Encoder Selection | |||||
Input Coordinate | Resolution Setting | ||||||
Display in Metric British Units | Linear Compensation | ||||||
Power Off Memory Function | Counting Direction Selection | ||||||
ABS/INC Coordinate | 200 sets of SDM Coordinate | ||||||
Ref Ruler Storage Function | Non-linear Compensation | ||||||
Calculator | 1/2 Function | Sleeping Function | |||||
Special Functions | |||||||
PLD Function | PCD Function | Simple R Function | Smooth R Function | ||||
Bevel Machining Function | Rectangle Chambering Function | ||||||
200 sets of Tools | Radius/Diameter Conversion | ||||||
Y+Z Function (special for 3 axis lathes) Digital Filtering Taper Measuring Function | |||||||
Optional Function | |||||||
EDM Function | RPM | RS232 |