Heiman fire fighting equipment decorative smoke detector with relay output

Heiman fire fighting equipment decorative smoke detector with relay output

 Features of Heiman fire fighting equipment wired smoke detector with relay output :

• Certification:CE EN54-7
• Photoelectric - ideal for detecting smouldering fire
• 2-wire, 4-wire connection
• Wide operating voltage range; Power Supply Non-Polar
• MCU Processing; High resistance to false alarms
• Compatible with general  fire alarm control panels
• Ceiling/wall mountable
• Red LED indicates that the detector is operating properly and alarm mode
• Power-Off Reset; Remote LED Indicator (2 Wire) 
• Alarm Relay N.C. or N.O. Optional (4 Wire)
• Stainless Steel Shield in Chamber; Anti-RFI
• Installing Base Compatiable with Heiman HM-613Series Smoke Detector and HM-203Series Heat Detectors

• Power supply non-polar input;

• Execute criterion: GB4715, EN54-7, UL539;

• Design Patent No.:20103069320.2

   

 Technical specification:

Model of Conventional  smoke detector:

HM-612PC-2 
HM-612PC-4

Standards tested to:EN54-7:2000 + A1:2002 + A2:2006

Model of Standalone smoke detector:

HM-625PHS

HM-626PHS

Standards tested to:EN14604:2005/AC:2008 

 Wired Photoelectric Smoke detector

This product is a photoelectric smoke detector with options of 2-wire model and 4-wire model. The smoke chamber using the principle of smoke particles reflecting infrared lights can  accurately detect early smoke of a fire.  The smoke detector will go into alarm when signal level exceeds the alarm threshold and send the alarm signal to the control panel. During an alarm, the LED will constantly bright. 

Installation : 

1. keep the distance between the smoke detector and wall > 0.5m
2. Horizontally install the detector.
3. When installing on the ceiling, place the detectors as close to the center as possible.                                                           
4. Install the detectors base solidly. The detector can not be installed in worse environments, e.g. extreme cold, hot, dusty, humid areas. The dust cover protects the unit when not in service. Remove dust cover before use.

 Conventional Fire alarm systems :

MOQ :1000pcs  sample order is available 

1- Professional Smoke Chamber imported from AW company ( UK ) to test sensitivity and directivity of smoke detector ; 

2- Temperature and Humidity test chamber to test Heat detector ;

3- Aging test and calibration of our gas detector;

4- Walking test of PIR detector .

We are trying our best to supply you good Quality products . 

A : ISO certified factory since 2005. 10 years professional experience and ability  toaccept and fulfill ODM/OEM orders.Includes:   

1-The initial design service of appearance, structure and electronic parts ;

2- Mould opening;

3- Sampling;

4- Semi-products testing and supply;

5-  Mass Production for formal orders;

We also can quote very quickly as customer provided samples for OEM service.

B: Flexible technicals adjusting as per customer' s special request;

C: Answer your enquiries, questions and emails in 24 hours;

D: Direct control on material, testing, quality, leadtime etc.

Heiman Technology CO.,Limited was established in 2005.It is a high-tech enterprise with advanced equipments, professional R&D team and management team. We are engaged in the research, development, manufacture and marketing of security eletcronic products and fire electronic products.And the same time ,we have good services, excellent products, fast innovation, product quality is stable, cost-effective.   

Product Range: Smoke detector ,Gas detector,CO detector ,Heat detector , Fire alarm control panel , PIR detector , Infrared beam detector , Emergency Glass break , safeguard accessaries ,Burglar Alarm systems etc.