weight limit switch
Features: | |
* Zn die cast body | |
* Increased wiring space | |
* Earth grounding surface on same level as switching | |
* Easily interhagable contact block | |
* Fine adjustment of switching point via adjusting screw | |
* Galvanically separated contacts | |
* Screw termianals with self-lifting clamps ofr easy wiring | |
* Positive Opening of NC contacts | |
* 4 x 90 actuator positions | |
* Cable entyr available:M20 and 1/2 NPT | |
Specifications: | |
Operating Speed: | 0.05mm-2m/sec |
operating Frequency: | Mechanical:120 ops/min |
Electrical:30ops/min | |
Insulation Resistance: | >100MΩ@500V DC |
Contact Resistance: | <25mΩ |
Rated Current/Voltage: | 10A/600V AC(EN60947-5-1) |
UL/Cul Listed(E216958) AC15 A600/DC13 Q600 | |
Dielectric Strength: | 1000VAC for 1 min between non-continuous terminals |
2500VAC for 1 min between each terminal and ground | |
Service Life: | Mechanically 1.0×107 (operations) |
Electrically 5×105 (operations) | |
Operating Temperature: | about -25~+80 (-13~+176) without formation of ice |
Humidity: | <95%RH |
Degree of Protection: | IP67 |
Drawing: