Heavy duty series flooring tongue and groove machine

Function:DTE series machine, it used in the forming processing of board's two short sides, it uses six stations, install 10 shafts, has a space station for scraper system.

1.Double chain,straightness precision is 0.02mm;Lead rail main body use alloy material, hardness about 650;
2.Two chain are bearing rolling,error of pitch is 0.005mm,the whole line accumulative error less than 0.1mm;
3.Upper press with manual adjustable to meet corresponding floor thickness, it use D and V belt passive compress;
4.In the front of have feed bin, photoelectric control, feed bin max. stacking height 150mm, one side can adjust fixed running rule, one side can adjust elasticity blind after feed bin, to ensure the board left and right position. Feed bin max.width can achieve 650mm;
5.Between two feeding chain have a support table, can ensure board leveling when cutting, the support table is knockdown, make sure different working size.
6.Have blower system in chain, make sure chain inside positive pressure, reduce dust into;
7.pusher of feeding chain standard pitch is 400 (600) mm, the pusher more than chain pad size decide to customer's working thickness
8.The tool tip under slider uses carbide material, wear resistance;
9.The tool tip upper press carbide material use air pressure to bring steady pressure, the air pressure can adjust;
8. Have 5 motors in each side, each station has a Dia. 120mm dust hood; it has 2 sets scraper system, and all have filter box, after scrape stripe will not be suck into dust pipe
9. Under each cutter shaft have a dust hood inside machine body, it can suck omissive dust again
10. The cutter shaft use T lead screw adjust, show distance on the numerical indicator, have dialgage delicate adjusting, the precision can achieve to 0.01mm.;
11.Adjust angle of cutter shaft by turbine worm system, it use screw rotate can 3600 adjust, easy to use;
12.The equipment have noise enclosure, inside has noise cotton; Have rings on the top of machine, can hoisting entirety.

1.Working width:600-1800 mm
2.Working thickness: 4-15 mm
3.Height of working table: 950 mm
4.Rotate speed of cutter shaft: 6000-7000 rpm
5.Feeding speed:20-40 m/min
6.Motor power of cutter shaft:(Inverter control)
The 1st station power (each left and right):5.5 kw precutter,+45°,up milling Φ250
The 2nd station power (each left and right):5.5kw precutter,-45°,up milling Φ250
The 3rd station power (each left and right):3kw profile-cutter,+90°,up milling Φ250
The 4th station power (each left and right):space (can install scraper system)
The 5th station power (each left and right):5.5kw finish-cutter,+90°,up milling Φ250
The 6th station power (each left and right):3kw click-cutter,+(-)45°(22.5°),up milling Φ250
7.Feeding motor power: 4 kw(Inverter control)
Blower motor power:2.2kw X2
Width adjusting motor: 1.1kw
8.Cutter diameter: Φ220-250XΦ40
About cutter we suggest use hydraulic system , the other motor need to notes specially.
9.Dust hood diameter
Station 1st 2nd 3rd 4th 5th 6th :Φ120mmX12
Machine cover diameter:120mmX2
10.Weight:9500 Kg

●Provide the information in time at customer requirement and make reasonable proposals and budgeting

●Give technical support for the customer's renovation of old facilities for free

●Provide service and support to the customer's other equipments

●On-site planning for the customers by professional engineer

●Valuable advice and recommendations on the purchasing of other auxiliary accessories

●Free training for operators

●For all sold prodcts ,provide one-year free door to door service,lifetime keep-up and maintenance service

●All-around keep-up,transportation and transformation of equipment

●Provide production and technical advisory service