The transfer car can be used in explosive, high temperature, ferry and other occasions. This kind of transfer car is a DC motor, which starts smoothly, has a large starting torque, small impact on the reducer, low voltage, and long service life.Including frame, brushless DC motor, reducer, wheel, battery, charger, etc.The electric cart can be used in ferry conditions and in flammable and explosive environments, and the hydraulic lifting device can be installed on a flat cart.The development of the rail transfer trolley is designed to significantly reduce the material handling requirements of cranes and forklifts, while providing fast, safe and smooth material and/or product movement through manufacturing facilities.
parameter
Advantage
1.Payload from 1 ton to 300 tons;
2.Fixed speed or variable speed capabilities;
3.transfer cart can run on the C-form track or S-form track and L-form track;
4.Stop automatically when pedestrian or obstacle is detected.
5.Limit switches and buffers on both sides.
6.The structural parts are made of Q235B rolled steel plate, 1.5 times load design and 1.25 times load test.
7.With conventional electrical protection: over current, over voltage, under voltage, short circuit, overheating, grounding, leakage and other protective devices.
8.As per the working environment, the anti-high temperature, anti-explosion, anti-rust, anti-skid measure can be adopted properly.
9. Remote Operation, Safe and Reliable: The transfer cart adopts wireless remote control with a control distance of 400m to meet remote operation and high safety factor.
10. Long Service Lifetime: The battery adopts maintenance free powered, the table of cart is not easy deformation in 20 years.
KPJ series are reel-powered transfer cart, powered by cable reels ac 380V.The cable drum is hysteresis coupling type to ensure that the cable is evenly stressed and not easily damaged.Ac 380V provides electric power for YZ crane metallurgical motor on flat car, and the motor drives flat car to run.When the flat car is running, the cable drum will automatically roll up or release the cable. Affected by the power supply length of the coil drum, the generally large running distance is less than 200m.
KPD series is 36V single-phase (three-phase) low-voltage track power supply electric flat car, power supply by track sliding touch line.Ground step-down transformer control cabinet will step-down single-phase (three-phase) ac 380V to single-phase (three-phase) 36V, feed it to flat car via track sliding contact line, and then boost it to single-phase (three-phase) ac 380V via on-board step-up transformer.Because no cable is used, it is safe and reliable, not afraid of hot, not afraid of smashing, does not hinder the cross transport, easy to achieve remote control and automation, to the plant transport layout with great convenience.
The product KPDZ not only inherits the advantages of KPD flat car, but also avoids the disadvantages of the original model, such as difficult starting and short running distance.KPDZ flat car with on-board rectifier device will track single-phase (or three-phase) ac 36V rectifier into dc 36V, drag dc traction motor to make flat car operation, dc motor compared with ac motor has the advantages of not easy to burn, large starting torque, strong overload capacity
KPX series are battery electric flat cars, powered by battery.The battery provides power to the dc traction motor, which drives the flat car.Compared with ac motor, dc motor has the advantages of low burning loss, large starting torque and strong overload capacity.Running distance is not restricted.It has greater safety performance and flexibility than KPJ, KPD two series flat car, running distance is not limited, no insulation requirements on the track, so the construction is convenient and low cost.
All flat cars can be equipped with industrial wireless remote control devices.
Henan Hengtai co., LTD. By virtue of scientific management system, convenient transportation conditions, strong production capacity, advanced detection means and strong sales network, to produce high quality, beautiful appearance lifting products to serve large and medium-sized enterprises at home and abroad.Company has a sound quality assurance system closely, the product research and development, design, manufacture, process, quality inspection, after-sales service and other links are covered in the quality assurance system under the control of, in the elaboration structure, energy conservation, environmental protection, safe and reliable, to adopt new technology of new materials and other aspects, make the product quality level enhances unceasingly, product marketing all over the world.
1.Q:Which industry do you serve?
A:We serve many industries,including machinery, metallurgy, electric power, railway, water conservancy, port, aviation, military industry, automobile, shipbuilding, petroleum, chemical engineering, coal, steel manufacturing, precast concrete, steel structure warehouse, marble, stone and other industries.
2.Q:Whether you can offer customized crane?
A: Of course, we are manufacturer, and we have our own engineer group. They can work out customized design according to your requirement. The most important thing is that you tell us what you need.
3.Q:Which areas do you server?
A:We have a very large market in China, and our cranes are exported to all over the world, including Europe, Africa, Middle East, Asia, North America, South America, etc. We have served more than 100 countries worldwide accumulatively.