Item | Unit | CW61100 | CW61125 | CW61160 |
Swing over bed | mm | 1000 | 1250 | 1640 |
Swing over carriage | mm | 615 | 865 | 1250 |
Maximum length of workpiece | mm | 1500-18000 | 1500-18000 | 1500-18000 |
Maximum turning length | mm | 1300-17800 | 1300-17800 | 1300-17800 |
spindle speeds( | r/min | 3.15-315 | 3.15-315 | 3.15-315 |
Span of guideway | mm | 755 | 755 | 755 |
Spindle nose | mm | A2-15(8XM22) | A2-15(8XM22) | A2-15(8XM22) |
Spindle bore | mm | 130 | 130 | 130 |
Taper hole of spindle | 1:20/140 | 1:20/140 | 1:20/140 | |
Number of forward turning speeds | 21 | 21 | 21 | |
Number of reverse turning speeds | 12 | 12 | 12 | |
Number and range of metric thread | 44;1-120mm | 44;1-120mm | 44;1-120mm | |
Number and range of inch thread | 31;28-1/4 | 31;28-1/4 | 31;28-1/4 | |
Number and range of module thread | 45:0.5-60mm | 45:0.5-60mm | 45:0.5-60mm | |
Number and range of diametrical pitch thread | 38:1/2-56DP | 38:1/2-56DP | 38:1/2-56DP | |
Distance between spindle center-line and tool resting plane | mm | 48 | 48 | 48 |
Section of tool shank | mm | □45 | □45 | □45 |
Rapid travel speed(longitudinal) | mm/min | 3740 | 3740 | 3740 |
Rapid travel speed(Transverse) | mm/min | 1870 | 1870 | 1870 |
Rapid travel speed(Top slide) | mm/min | 935 | 935 | 935 |
Diameter of tailstock quill | mm | 160(6") | 160(6") | 160(6") |
Travel of tailstock quill | mm | 300(12") | 300(12") | 300(12") |
Taper hole of tailstock quill | Morse 6 | Morse 6 | Morse 6 | |
Main motor power | kw | 22 | 22 | 22 |
Maximum weight of workpiece | kg | 6000 | 6000 | 6000 |