Naipu® NP-ZJG
Series of ZJG Slurry Pump
Specification
D65-300mm Q50-1800m3/h H50-94m
a) Caliber: DN65-DN300mm
b) Flow:50-1800m3/hr
c) Head:50-94 m
d) Rotate speed:740-2900r/min
e)Working pressure: ≤3.6mpa
Function Introduction
1. The structure of ZJG (P) pump is horizontal, single-suction, single-stage, cantilever, double-casing and centrifugal, and the wet parts of the same discharge between Z JG and ZJGP can be interchanged;
2. Designed with CAD software, good hydraulic performance, high efficiency and lower abrasion;
3. Wider flow channel, good ability of non-clogging and NPSH;
4. Expeller seal combined with packing seal and mechanical seal to guarantee that no leakage will happen;
5. Reliable design ensures the MTBF (Mean Time between Failures) can be increased significantly;
6. Bearing is lubricated with thin oil, and it can work under low temperature by setting the lubrication and cooling system reasonable;
7. Wet parts are made of special material with good ability of corrosion and wear;
8. The pumps can be connected in multi-stage in series under the allow pressure (3.6MPa).
ZJG series Pump Typical Application:
Delivery of slurry with strong abrasion and high concentration for various of industry conditions, especially high head conditions