Heavy Duty Cantilever Racking System Products for Sales
Brief Introduction
Jracking Cantilever Rack is designed with C/C roll-formed upright column of hot-rolled coil, while arm and column are bolted connected by lifting lug. The base is a welded single unit to be bolted with column. Adjustable diagonal flats and connecting bar is designed to improve the whole stability. Both single-side and double-side bases are available to meet different storage requirements.
Advantages
lExceeding 6m height is available, the highest column is able to reach 10.5m;
lHeavy loading, loading of single-arm can up to 1500kg.
lKeep selling to Australia market more than 10 years.
lLong and irregular material goods stored.
lOur arm has a 2° uptilt which can make sure the arm won’t tilt down while goods placing.
lExcept from the regular size, the longest arm can last to 3m.
lThe connection of our cantilever column and arm is ingenious, it can mitigate the impact of forklift operation.
Mitigate the Impact of Forklift Operation Extra Long Arm
Column
Jracking heavy duty cantilever rack column is made of roll-formed C/C profile quality steel.
Section of Column
Column |
Specification |
Dimension |
Height |
305 |
305x96x3 |
2500mm-10500mm |
|
350 |
350x96x4 |
||
410 |
410x96x4.5 |
Loading capacity mainly depends on column height and arm length.
Specific dimension also can be customized as request.
Arm
The range of loading capacity/per arm is 500kg-1500kg.
Specific dimension also can be customized as request.
Arm |
Specification |
Length |
H120 |
800-2000mm |
|
H150 |
||
H180 |
Loading Table(Kg)
length height loading |
800 |
1000 |
1200 |
1400 |
1600 |
H120 |
1500 |
1380 |
1020 |
750 |
570 |
H150 |
1500 |
1500 |
1250 |
1190 |
910 |
H180 |
1500 |
1500 |
1250 |
1250 |
1250 |
Method of Goods Placing
The effects of correct and incorrect practice are both shown in the Figure below.
Base
Single Base and Double Base
Relationships of length between single/double base and arm are as follows:
Single Base(L)=Arm length+390mm;
Double Base(L)=Arm length*2+318mm;
H-bracing and X-bracing
The relationship between goods size, arm length and C/C distance.
Item |
Dimension |
C/C Distance |
H-bracing |
60x30x2.5 |
500mm-2000mm |
X-bracing |
Φ32x1.5 |
C/C distance 1000, 1200,1400, 1600, 1800, 2000.
Other specific dimension also can be customized as request.
Accessories
Project Pictures of Jracking Cantilever Rack
Our Service