HCZ series thermal conductive grease is a kind of thermal conductive composite with grease-state , base silicone epoxy as main raw material, add heat-resisting materials with good performance of thermal conductivity. This material can effectively reduce thermal resistance on interface between heat sink and heat generator. HCZ series thermal conductive materials have the feature of low oil separation , high and low temperature change resistance, water proofing, aging resistance, have good performance with electric insulation, thermal conductivity. The materials can keep the humid grease-state on the interface for a long term at -40 to 200℃.
HCZ thermal conductive grease product data
Test items | HCZ100 | HCZ150 | HCZ200 | HCZ300 | Unit | Test method |
content | silicone oil,metallic oxide and thermal conductive fillers | ——— | ——— | |||
form | paste | paste | paste | paste | ——— | Visual |
color | white | white | gray | yellow | ——— | Visual |
viscosity | 45000 | 50000 | 50000 | 50000 | cps | NDJ-4 |
density | 2.1 | 2.3 | 2.5 | 2.8 | g/cm3 | ASTM D792 |
Continuous use Temp | -30~150 | -30~150 | -30~150 | -30~150 | ℃ | EN344 |
volatility | <1 | <1 | <0.5 | <0.5 | % | 120℃,4hr |
Oil Separation | <1 | <1 | <1 | <1 | % | 120℃,4hr |
thermal impedance | 0.155 | 0.135 | 0.105 | 0.083 | ℃.in2/W | EN344 |
Thermal conductivity | 1 | 2 | 3 | W/m.k | ASTM D5470 |
1.Good performance with thermal conductivity;
2.Low thermal resistance and oil separation;
3.Excellent performance with electric insulation;
4.high and low temperature change resistance;
5.water proofing, aging resistance;
6.Moisture-proof,anti-corrosion,Reliability;
7.Moist interface reduce thermal impedance;
8.make for the effect of thermal conductivity;
Q1. Can we get some free samples from you?
A: Yes, you can get some free samples, but the shipping cost of samples should be paid by you.
A:We have obtain UL, SGS, ROHS ISO and REACH certificattes, approved by third party with testing report. we can provide you with the testing report of thermal conductive matrials to ensure our product quality.
A: We have thermal conductive silicone pad with different thermal conductivity including HC100, HC150, HC200, HC250,HC300,HC400,HC500, HCP100. And we have thermal conductive adhesive tape: HCT with PET as base material and HCTM without PET as base material. We also have thermal conductive graphite sheet apply in different electronic industries. GSH is apply on smart phone, GSB is for laptop , and GSM is for LED.
A: Yes , all the thermal conductive materials except HCP series, thickness no more than 0.5mm can add fiberglass as carrier.
A: Our products are widely used in various industries, including poower supply, LED lights, laptop, LED TV, Set top box, communication, heat transfer, chip IC, automotive electronics and photoelectricity etc.
A: Our thermal conductive silicone pad use silicone rubber as based material. The service life of silicone pad depend on the service life of silicone rubber. The silicone rubber industry recognizes a 20-year life for silicone rubber when used within specified operation parameters.
A: The shelf life is a measurement of stable storage life in specified storage conditions. Shelf life for thermal conductive gap filler pad is one year after date of manufacture. For thermal conductive gap pad with adhesive, the shelf life is six months after the date of manufacture. After these dates, inherent tack and adhesive properties should be re-characterized.
A: Yes, all our thermal conductive materials are isolating with the voltage endurance over thousands of volt.