Heat resistant stainless steel pipe fittings 1 2 inch flange metallic braided flexible steam hose

Heat resistant stainless steel pipe fittings 1 2 inch flange metallic braided flexible steam hose

What's the flexible metal braided hose?

Flexible metal braided hoses and fittings can be used widely in systems like water, steam, hot oil and gas with their resistance to pressure and flexibel structure.

They are utilized for conducting liquids, compensating the problems originated from installation, absorbing vibrations and expansions.

Flexible metal hoses may be strengtened by double braiding in order to increase their resistance to pressure and environmental conditions. It is also possible to reinforce them by springs with different wire thicknesses or by stripwounds to lengthen their service life for more sever environmental condition.

What about the Specification of flexible metal braided hose?

Dimensions Chart
D   N		Inner     Dia.	Outer   Diamter		d    d1    d2	Without      Braiding		Single    Braiding		Double   Braiding		Bend Radius
												Single Braiding		Double Braiding
mm	inch	d   (mm)	d1 (mm)	d2 (mm)	tol.         ( ± )	20℃ (bar)	kg/m	20℃ (bar)	kg/m	20℃  (bar)	kg/m	Static	Dynamic	Static	Dynamic
6	1/4"	6.1	9.6	10.7	0.20	24	0.07	198	0.15	297	0.24	25	80	35	100
8	5/16"	8.2	12.1	13.6	0.20	17	0.08	176	0.20	264	0.33	35	125	45	145
10	3/8"	10.1	14.3	15.6	0.20	12	0.10	131	0.21	196	0.34	40	130	50	150
12	1/2"	12.2	16.8	18.3	0.20	9.0	0.11	93	0.22	140	0.35	45	140	55	160
16	5/8"	16.2	21.8	23.8	0.20	7.0	0.17	85	0.36	128	0.58	60	160	70	190
20	3/4"	20.3	26.6	28.4	0.20	4.0	0.22	76	0.45	115	0.71	70	170	80	200
25	1"	25.4	32.2	34.3	0.30	3.0	0.35	60	0.65	90	1.05	85	190	100	230
32	11/4"	34.3	41.1	42.9	0.30	2.5	0.48	54	0.93	80	1.45	105	260	120	310
40	11/2"	40.0	49.6	54.0	0.30	2.5	0.60	42	1.25	63	2.00	130	300	160	360
50	2"	50.5	60.5	62.4	0.40	1.6	0.70	35	1.40	52	2.20	160	320	200	380
65	21/2"	65.5	80.0	82.0	0.60	1.5	1.05	26	2.00	42	3.00	200	440	250	520
80	3"	80.4	96.0	98.0	0.60	1.5	1.10	18	2.20	29	3.35	220	550	270	640
100	4"	100.5	117.0	119.0	0.85	1.2	1.40	16	3.00	25	4.65	230	660	300	760
125	5"	125.2	149.5	152.0	0.85	0.9	2.65	16	4.95	25	7.35	280	760	340	900
150	6"	150.6	175.5	178.0	1.50	0.9	3.25	12	5.80	19	8.50	320	920	400	1070
200	8"	200.0	227.0	230.0	2.50	0.7	4.90	10	9.30	16	13.85	450	1150	550	1250
250	10"	250.0	278.0	281.0	4.00	0.5	7.60	8	14.10	12	20.80	580	1330	680	1580
300	12"	300.0	337.0	340.0	6.00	0.3	11.00	6	18.40	8	25.90	700	1500	800	1800

What's the Advantages of flexible metal braided hose?

1. With good characteristic of light weight, large diameter, good flexibility, resistant to high temperature, high pressure and corrosion.

2. With available double SS304 wire braid for high working pressure.

3. The inner tube is made of stainless steel corrugated tube which equips with good performance of high temperature and hig-pressure resistance.

4. Applied to repeated motion in high temperature areas, good anti-fatigue performance.

What's the Application of flexible metal braided hose?

Flexible metal braided hoses are widely used in the areas of heating, ventilation, conditioning systems, iron and steel industry, chemical and petrochemical facilities, oil and gas refineries, chemistry and food industries, aircraft and ship construction facilities.

Installation Guide

1. Avoid torque.

Do not twist the hose assembly during installation when aligning the bolt holes in a flange or in mating up pipe threads. The utilization of lap joint flanges or pipe unions will minimize this condition. It is recommended that two wrenches be used in making the union connection: one to prevent the hose from twisting and the other to tighten the coupling.

2. Prevent out-of-plane flexing in an installation.

Always install the hose so that the flexing takes place in only one plane--this being the plane in which the bending occurs.

3. Avoid over bending.

The repetitive bending of a hose to a radius smaller than the radius listed in the specification tables for corrugated hose will result in early hose will result in early hose failure. Always provide sufficient length to prevent overbending and to eliminate strain on the hose.

4. Avoid careless handling of the hose assembly.

Always lift or carry metal hose to prevent abrasion damage particularly to braided corrugated hose. Store metal hose assemblies away from areas where it can be subjected to spillage, corrosive fumes or sprays, weld splatter, etc.

5. Always support the piping.

A piping system which utilizes metal hose to absorb movement must be properly anchored and / or guided.

Always support the piping to prevent excessive weight from compressing the hose and relaxing the braid tension.

Finish Products:

Photo for heat resistant stainless steel pipe fittings 1 2 inch flange metallic braided flexible steam hose

100% quality assurance. Inner corrugated hose and outside wire braid are all made of stainless steel304/316. For this way can avoid media corrosion to the metal hose and largely prolong the life-span of the metal hose.

Poor quality metal hoses are usually made of SS202, even some suppliers use the material of SS201 to make the wire braid and inner tube. In this way, the lifespan of metal hose are reduced largely and incerease the maintence and time cost to the customers.

What's worse, the poor quality metal hoses are easy to cause the leakage of media, and then cause the security incidents.

Purchase Guide:

To properly design a metal hose assembly for a particular application, the following design parameters must be determined

Temperature.

You should provide us this information as the temperature to which the assembly is exposed a proper fit   

Size.

The diameter of the connections in which the assembly will be installed is needed to provide

Media.

This is important since you must be sure that the assembly's components are chemically compatible with the media going through the hose as well as the environment in which the hose is installed

Pressure. 

Identify the internal pressure to which the assembly will be exposed. This information is important to determine if the assembly is strong enough for the application

Identify the necessary end fittings

This is required since fittings for the assembly must be chosen to properly fit the mating connections

Shipping:

1. FedEx/DHL/UPS/TNT for samples, Door-to-Door.

2. By air or by sear for batch goods, for FCL; Airport/port receiving.

3. Customers specifying freight forwarders or negotiable shipping methods!

4. Delivery Time: 3-7 days for samples; 5-25 days for batch goods.

 Reducing the Cost, Saving the Time and Best Service!!!

Foshan Hongchang Jufa Electromechanical Valve Co., Ltd  is a factory set up in 2006. We are specialized in researching, developing and manufacturing different kinds of rotary joint, flexible metal hose, rubber hose, bellow expansion joint andvalve equipment in China.

Our mission is: Offer high-quality goods, excellent service, and reasonable price to customers; Use our product, you will get more benefits!

Certification:

Why Choose Us?

Experient Factory. Manufacturing Rotary Joint, Expansion Joint, Flexible Metal hose, Teflon Hose etc. over 8 Years.

Patent. We have our Patent for our Products.

Customized Service. Available Made by Your Drawing.

Available Stock, Fast Delivery. Most of Product We have available Stock Ensuring the Fast Delivery.

Warranty. We Provide One-Year Guarantee for Our Clients. If You use Our Rotary Joint Correctly, We will Free to Service Them Changing Damaged Part

Where is Our Factory?

 Our factory locates in No.16 Henggui Middle Road, Lianhe Industrial Area, Luocun Town, Nanhai

District, Foshan, Guangdong, China.

What's Your Main Products?

Rotary Joint, Flexible Metal Hose, Bellows Expansion Joint, Hydraulic Rubber Hose and Ball Valve Equipment is our Main Products.

What Services Can We Offer You?

 OEM service offered, Design Service Offered, Buyer Label Offered.

 We can custom the Rotary Joint according to your drawing.

 We can give you the professional suggestion of your problem happen in your working process.

What's the MOQ & Price & Payment Term & Delivery Time ?

MOQ: 1 piece.

Price: we quotate EXW price commonly. If you need FOB, CIF price, please inform us!

Payment Term: T/T, wester union, Paypal. Nomally 30% deposit in advance, the balance    should be paid before shipment

Delivery Time: 3-20 days should be considerate the condition.