TYPICAL PROPERTIES | Thermal Stability ....................................356°F/180°C Temperature Range ............................-65°F to +500°F (-50°C to +260°C) Volume Resistivity.................................. 1013 ohm-cm min. (ASTM D257) Self Adhesion ............................................2 p.p.i min. (ASTMD2148) Hardness ........................................................50±10 Shore A (ASTM D2240) Moisture Absorption ..........................0.9% (46 hrs. in H2O @ 70°F) NOTE: The above properties are published as a guide only, and should not be used for specifications without testing in your own laboratory. |
PERFORMANCE ADVANTAGES | • Resists moisture, oxygen, and ozone to assure continuous high insulation values. • Conforms smoothly when wrapped around complex forms. • Bonds to itself at room temperature within 24 hours. • Remains non-tacky to the touch and does not adhere to other surfaces, or substrates. • Insulates with single wrap, thereby reducing labor time and cost. • Dampens vibration and resists heat and mechanical shock as well as corona. • Inherently flame retardant and when burned forms a non-conductive ash. Meets the horizontal burn test criteria prescribed in FAR 25.853. • SA & SB MOX-Tapes® provide a uniform thickness even around sharp edges. Fiberglass fabric, encapsulated inside the silicone rubber, prevents wicking and maintains high insulation resistance under high humidity conditions. These controlled stretch tapes provide a uniform insulation barrier. • All tapes are protected by a special interleaved liner. |
APPLICATIONS | Mechanical • Protection of coils from vibration. • Vibration fixture, anti-scratch, and clamping pads. • Harness wrapping and wire bundling, including for high temperature applications. • Applied to rollers for protection and traction. • Plant maintenance. • Superior, heavy duty repair tape for emergency insulating barrie Electrical • Insulation of field armature and interpole coils in large motors. • Insulation for splicing and terminating of wire and cable. • Insulating and sealing electrical connections. • Insulating coil leads and bus bar connections. • Electromagnetic coil insulation. • Motor connections. • Overwrapping of deteriorated insulation in reclaimed motors. Environmental • On-board aviation and space applications. • Underground cable splices. • Insulating heated transfer lines. • Insulating in radioactive environments. • Masking agent utilized in manufacturing processes and powder coatings. • Insulating, protecting, and sealing rigging hardware and power systems in marine applications. |
CERTIFICATIONS | Tapes are manufactured under ISO9001:2000 certification. Products can also be certified to many of the following specifications upon request. • MIL-I-46852C, Type I & Type II • A-A-59163, Type I & Type II • MIL-I-22444C • Boeing DMS2186 Type 1 & Type 2 • Lockheed Martin MMS J517 • Lockheed Martin 5-00857 • General Electric A50A493 • General Electric A50E112 • General Dynamics P5384 • Rohr RMS315 • FAR 25.853 • UL listed |
Question & Answer
1.What are the main products of your company?
For the Silicone self fusing tapes project, we are certified distributor by Rogers Corporation Arlon brand in China, and we also have our own manufacture plant to custom made the silicone tapes.
2.What are Arlon and Arlon silicone self fusing tape products?
Arlon, a division of Bairnco Corp. has been a leader in
silicone rubber and silicone adhesive technologies for nearly five
decades. Silicone rubber is a unique elastomer that delivers high
performance for a wide variety of applications. Product uses range
from thermal insulation pads and molded heat shields for aircraft,
aerospace, and automotive applications to substrates for flame
retardant flexible heaters, ducting, and motor coil insulation. We focus
on precision-calendered silicone rubber, coated fabric, and specialty
extruded silicone rubber tapes. Our development team continually
explores new technologies so that Arlon remains the world leader in
silicone technology.
3.May I have free Silicone self fusing tape samples?
Free samples are available. International shipping cost need to be prepaid.
4.What are the packing for Silicone self fusing tape?
Poly bags for each and color printing boxes are available. Custom-made packing and logo are also acceptable based on bulk orders.
5.What are the Silicone self fusing tape lead time?
lead time will be 4 to 6 weeks after order confirmation, MOQ 200 rolls standard size will be acceptable.
6.What are the acceptable payment methods for our orders?
Alibaba trade assurance order is highly recommended. In this case, credit cards and T/T are both accepted by Alibaba. We also accept Paypal or Westenunion for initial or testing orders. T/T and L/C are both available for main orders.
7.Could you send the Silicone self fusing tape to Amazon warehouses by FBA?
We cooperate with worldwide customers to expand their retail projects continuously; help customers finish all processes including labeling or custom- made FNSKU barcodes or Amazon shipping labels to meet all FBA requirements. Destinations include Amazon USA, Canada, Germany, Australia or United Kingdom, etc.