HDMI version | HDMI 2.0 |
HDMI resolution | up to 3840*2160/60Hz |
Support video format | 8/10/12bit Deep color |
Support audio format | DTS-HD/Dolby-trueHD/DTS/Dolby-AC3/DSD |
Max bandwidth | 600MHz |
Max baud rate | 6Gbps |
Input cable distance | (1080p resolution) ≤8m,(4K resolution)≤8m |
Output cable distance | (1080p resolution) ≤8m,(4K resolution)≤8m |
Power adapter | input AC (50Hz, 60Hz) 100V-240V; output: DC5V/3A |
Operating Humidity range | (-15℃to +55℃) |
Product Keywords | 8 port hdmi switch,hdmi switch 8x1,hdmi 4k switch 2.0 |
Introduction:
The 1x8 HDMI Splitter uses a single HDMI source,accessing to multiple HDMI sinks.Itallows one HDMI device to be split easily to 8 HDMI compatible monitors or projectors. Inaddition,it can be placed at the end of a long HDMI cable to regenerate the HDMI signal.The resolution of this hdmi splitter can be up to 3840X2160/60Hz.This splitter supports EDID management function, comes with eight kinds of EDID mode,the users can choose according to their own needs. In addition, this product is also built-inIR extension function, it can work with our hdmi 2.0 repeater which has IR-RX to receivethe IR command to control the source.
Features:
* Support HDMI 2.0 ,HDCP2.2
* Support HDR
* Support 3D video format
* Support CEC(only output1)
* Support high resolution up to 3840X2160/60HZ
* Support highest rate of 6 G and TMDS clock can be up to 600 MHz
* Support 8/10/12 bit deep color
* Support AWG26 HDMI standard cable:input up to 8 meters,output to 8 meters.
* Support one single HDMI source,accessing to multiple HDMI sinks, the source can be DVD player, A/V receiver, set top box and etc.
* Built-in IR extension function.
* Remote control the source (via the IR-RX of HDMI repeater which splitter works with to receive the IR command)
* Support serial port online upgrade
* Support EDID management
* Support output downscaling
Interface |
Functional description |
DC/5V |
5V Power Interface |
OUTPUT1-8 |
HDMI OUT1-8 |
INPUT |
HDMI IN |
EDID |
DIP switch,using for EDID management |
IR |
IR TX Extension Interface |
RS232 |
RS232 port,serial port online upgrade |
Reset |
Reset button |
OFF/ON |
Power switch |
IR Extension description:
There is an IR TX Extension port, it can work with an optional HDMI 2.0 repeater which works as IR-RX and IR extended via HDMI cable.
1 2 3 4 |
|
X 0 0 0 |
copy output1 EDID only |
X 0 0 1 |
EDID MIX (HDR) |
X 0 1 0 |
EDID Download (RS232) |
X 0 1 1 |
4K/30Hz 2ch |
X 1 0 0 |
4K/60Hz 2ch |
X 1 0 1 |
1080p 3D 2ch |
X 1 1 0 |
1080p 2D 2ch |
X 1 1 1 |
1080p 2D 5.1ch |
Only output 1 can support CEC function, output 2~8 support IR extension function.
Working Mode Description:
There are two working mode for product, normal working mode and upgrading mode, which is decided by DIP EDID switch 1,
1 is upgrading mode,0 is normal working mode.(switch down is 1, otherwise is 0)
1: connect the HD source to the splitter input with one hdmi cable
2: connect the splitter output to the diaplays with 8 hdmi cables
3: connect 5V/3A power adapter to the splitter
4. Reset button: it’s a Reset key for system Reset.