Hc-Sr04p Ranging Module Hc-Sr04 Ultrasonic Sensor
1. This module has stable performance and accurate measurement distance.
The high precision of the module, close proximity of the blind zone (2cm), and stable ranging are the strong basis for this product to successfully enter the market! This module is completely humble GH-311 anti-theft module
2 Main technical parameters:
1: Use voltage: DC5V 2: Quiescent current: less than 2mA
3: level output: high 5V
4: level output: bottom 0V
5: Induction angle: no more than 15 degrees
6: Detection distance: 2cm-450cm
7: High precision: up to 0.3cm
On-board wiring, VCC, trig (control terminal), echo (receiver terminal), out (empty foot), GND
Note: The TRIP pin is a 10K internal pull-up resistor. Use the IO port of the microcontroller to pull down the TRIP pin, and then give a pulse signal of more than 10us.
The OUT pin is the switch output pin when the module is used as an anti-theft module. This pin is not used by the ranging module!
Note: The module should be plugged in on the circuit board and then powered on to avoid high-level misoperation. If it occurs, re-energize it to solve it.
This module can provide distance measurement programs: C51, PIC18F877, Yilong MCU, and three MCU test references.
Working principle of URF04 module:
(1) Adopt IO to trigger distance measurement and give a high level signal of at least 10us;
(2) The module automatically sends eight 40khz square waves and automatically detects whether a signal
returns;
(3) When a signal returns, a high level is output through IO. The duration of the high level is the time from the transmission of the ultrasonic wave to the return.
Test distance = (high level time * speed of sound (340M/S))/2;
This product is easy to use. A control port sends a high level above 10US, you can wait for the high level output at the receiving port. Once there is output, you can start the timer to count, and you can read when this port becomes low level. The value of the timer, at this time, is the time of the distance measurement before the distance can be calculated. With such continuous periodic measurement, you can reach the value of your mobile measurement!
The working principle of the module:
(1) Adopt IO to trigger distance measurement and give a high level signal of at least 10us;
(2) The module automatically sends eight 40khz square waves and automatically detects whether a signal returns;
(3) When a signal returns, a high level is output through IO, and the duration of the high level is
Ultrasound time from launch to return. Test distance = (high level time * speed of sound (340M/S))/2;
This module can provide a full range of ranging programs: C51, PIC18F877, ultrasonic LCD1602 display, ultrasonic LCD12864 display, digital tube display, serial port display, etc., ranging reference program.
Shipping&Delivery
A. By Express-such as DHL, FedEx, UPS, TNT. It is door-to-door, usually 3-7 days for the delivery.
B. By China Post. It takes 20-60 days for the delivery.
If it is urgent, we would suggest you choose Express delivery(The fast one).
If it is not that urgent, you may choose China post. It is slower but much cheaper.
Manufacturer | Original Manufacturer |
Series | Standing |
Part Status | Standing |
Frequency | Standing |
Voltage - Input (Max) | Standing |
Type | Standing |
Impedance | Standing |
Capacitance @ Frequency | Standing |
Operating Temperature | Standing |
Size / Dimension | Standing |
Termination | Standing |
FAQ
Q. Who are you?
A: We are a manufacturer of electronic components and distributor for more than 60 industry-leading suppliers all over the world. Our products are ICs, Inductors, Resistors, Potentiometers, Capacitors and FFCs, etc. Everything you can think of about electronic components!
Q. Are your products original?
A: Yes all products are original and produced by original manufacturers.
Q. What is your lead time?
A: No lead time for in-stock products. Most of the products can be sent out within 3 days after payment is confirmed.
Q. What is your warranty?
A: 90 days after goods have been received. Our products will be 100% tested before they are sent out.
Q. What's the MOQ for your products?
A: We accept small orders from our customers. Please contact with us.
Q. How do I pay for the order?
A: You may pay by TT, Paypal, Western Union and Alibaba online. Or you may also consult us.
Q. How are my parcels shipped?
A: Normally we use DHL, FedEx, TNT, EMS and HONGKONG POST. Please contact with us otherwise.
Q. Do you provide the BOM Kitting service? Can I send my BOM to you?
A: Yes certainly. Please just contact us and send us your BOM and then we'll quote for you.