Concrete vibrator engine , work with concrete vibrator shaft, Is suitable to the commodity concrete, widely applies to the bridge, the harbor construction, the large-scale dam, the water wheel power plant, the high level building base pours into post picket, crowded reinforcing steel bar net coagulation dirt wall and major and medium small architectural engineering.
|
Working |
|
Vibrating rod size |
Φ35mm, Φ42mm, Φ50mm |
Vibrating frequency |
200-220Hz |
Amplitude |
0.82-1.15mm |
Flexible shaft |
2-3m (Optional) |
Engine |
|
Model |
HONDA GX35 |
Type |
Gasoline, air cooled, 4 stroke, single cylinder, OHC |
Power |
1.6hp/7000rpm |
Oil tank volume |
0.63L |
Lubricant L |
0.1L |
Fuel consumption |
360g/Kwh |
Dimension |
|
Total length |
400mm |
Total width |
310mm |
Total height |
440mm |
Weight |
|
Working weight |
11.5kg (not include rod) |
1.cylinder inclined model, four-stroke, air-cooled petrol engine, convenient to use, wide assortment |
2.It has the advantage of good mechanical performance,stable operation |
Concrete vibrator is used to consolidate cement and remove all the trapped air bubbles to give you the toughest cement possible, widely used in construction, transportation, water conservancy, port, mine and metallurgy, etc. It can be adapted to every type of application, vibrator heads and shafts can be easily combined and rapidly exchanged to match the right equipment to the job. |