HUAWEI VDSL Vectoring ONU MA5818

• Supports 20 Gbit/s upstream transmission and 1 Gbit/s access.
• Pioneers the use of G.fast, an innovative high-bandwidth copper access technology. G.fast enables networks to use wider spectrums to provide up to 1 Gbit/s symmetric or asymmetric bandwidths over the traditional twisted pairs. With G.fast, copper networks can meet the growing bandwidth demands from users.
• G.fast maximizes the use of existing copper resources in mature residential areas, allowing copper networks to compete with fiber networks in terms of access bandwidths, and enabling faster access, faster deployment, and shorter return on investment (ROI) cycle.
• In the upcoming cloud service era, new applications that require higher upstream and downstream bandwidths will become mainstream. Such applications include user image file (such as massive numbers of family videos) sharing, 4K, 8K, and virtual reality (VR). G.fast allows carriers to define upstream and downstream rates, use existing copper resources to support fledgling services such as home video communications, remote home surveillance and security protection, and city surveillance.

Large Capacity

Supports 96 channels of G.fast access and capacity expansion.

Flexible Capacity Expansion

• Provides separate VP slots to support smooth capacity expansion.
• Adopts the innovative G.fast board-inserted design, enabling on-demand G.fast deployment.

Fast Deployment

• Maximizes the use of existing copper resources to support future bandwidth demands and avoid the difficulty of deploying fibers to home.
• Be easily deployed at low cost.
• G.fast is compatible with VDSL2, allowing live-network users to smoothly upgrade. Moreover, G.fast lines consume less power than VDSL2 lines.

Easy Maintenance and Management

• Supports remote software commissioning, offline deployment, and plug and play (PnP).
• Supports remote fault locating, troubleshooting, and batch upgrade.
• Supports mature FTTx network management mode, in which G.fast lines can support and inherit the mature xDSL line diagnosis and line tests.

• 10 Gbit/s PON ports for upstream transmissions enable higher access bandwidth and service requirements. 10 Gbit/s PON networks coexist with PON networks and are compatible with existing Optical Distribution Networks (ODNs)
• Flexible service configurations and settings help you set configurations based on user requirements and keep pace with advancements in technology
• Multiple types of service boards can be installed in the same subrack to provide flexible GE, POTS, E1, and FE downstream ports
• G.fast is a new high-bandwidth access technology that applies to copper lines. The MA5818 provides rates of up to 1 Gbit/s over existing twisted pairs. G.fast is applicable to FTTB and FTTD networks

SmartAX MA5818
GPON	ITU G.984-compliance ITU G.984-compliance
	8 T-CONTs 32 T-CONTs
	128 GEM ports
Broadband	4K VLANs, supporting QinQ and stacking VLANs
	4K MAC addresses, supporting VMAC
	VLAN switching
	Conversion from PPPoA to PPPoE and from IPoA to IPoE
	802.1p, supporting PQ and WRR flow control, and ACL
Voice	SIP and H.248
	ISDN BRA port
	POTS short-loop design
ADSL2+	Compliance with ITU-T G992.1 to G992.5, and T1.413
	Annex M
	ADSL2+ bonding (2-wire, 4-wire, 6-wire, or 8-wire)
VDSL2	G993.2-compliance
	8a, 8b, 8c, 8d, 12a, 12b, 17a, and 30a profiles
	2-wire VDSL2 bonding
SHDSL	G991.2-compliance
	G.SHDSL.Bis, supporting ATM and PTM
	EFM bonding (2-wire, 4-wire, 6-wire, or 8-wire)
Maintenance and management	SNMPv1, SNMPv2, and SNMPv3
	Telnet and SSHv2
	Remote and batch pre-deployment
	Remote upgrade and monitoring
Multicast	IGMPv2 and IGMPv3
	IGMP proxy and IGMP snooping
	A maximum of 1024 configurable multicast programs in the system A maximum of 256 multicast users A maximum of 16 concurrent multicast programs for each user
Security	PPPoE + and DHCP option82
	Static and dynamic MAC address binding
	Anti-MAC and anti-IP spoofing; source MAC address and IP address filtering
	Anti-DoS attack and firewall

 

SmartAX MA5818
Dimensions	482.6mm×245mm×88.1mm
Network-side port	ADSL2+,VDSL2,SHDSL,POTS,ISDN,FE/GE
User-side port	The MA5616 provides four slots and the following 10 service boards: • 24-channel VDSL2 board (17a, over POTS, built-in SPL) • 24-channel VDSL2 board (17a, over POTS, external SPL) •24-channel VDSL2 board (17a, over ISDN, external SPL) •16-channel VDSL2 board (30a, over POTS, built-in SPL) • 32-channel ADSL2+ board (built-in SPL) • 32-channel combo board (32 × POTS + 32 × ADSL2+) • 64-channel POTS board •32-channel POTS board • 8-channel ISDN board •16-channel G.SHDSL board (supporting ATM and PTM)
Operating temperature	-40oC to 65oC; startup at -25oC
Humidity	5% to 95% (non-condensing)
Heat dissipation mode	Providing fans for heat dissipation. The rotating speed can be automatically adjusted.
Lightning protection capability	GE/FE: 6 kV POTS: 4 kV
Backup power	Support for 48-V backup power Support for lead-acid batteries and LiFePO4 batteries
Weight	4.8 kg (empty chassis) 7.2 kg (full configuration)