Model | Unit | HME63 | ||
Travel | ||||
X-axis | mm | 1000 | ||
Y-axis | mm | 770 | ||
Z-axis | mm | 900 | ||
Spindle | ||||
Spindle center to worktable surface | mm | 110-880 | ||
Spindle nose to worktable center | mm | 175-1075 | ||
Spindle taper | BT50 | |||
Rotating spindle speed | rpm/min | 6000 | ||
Spindle motor | kw | 15/18.5 | ||
Worktable | ||||
Table size | mm | 630*630 | ||
Division angle | deg | 1° | ||
Max. load on worktable | kg | 1200 | ||
Number of worktable | pcs | 1 | ||
Precision | ||||
Positioning accuracy of rotary table | arc-sec | ±5 | ||
Repeated Positioning accuracy of rotary table | arc-sec | ±2 | ||
Positioning accuracy | mm | 0.01 | ||
Repeated Positioning accuracy | mm | 0.006 | ||
Drive feed | ||||
Fast feed speed(X/Y/Z) | m/min | 24/20/20 | ||
Fast feed speed(B) | r/min | 10 | ||
Tool magazine | ||||
Capacity of tool magazine | 24 | |||
Max. tool diameter | mm | Φ105 | ||
Max. tool length | mm | 300 | ||
Max. tool weight | kg | 15 | ||
Tool change time | sec | 3.8 | ||
Air pressure | ||||
Air supply pressure | bar | 6-8 | ||
Air pressure flux | L/min | 280 | ||
Others | ||||
Voltage | kva | 35 | ||
Floor area (length*width*height) | mm | 4720*3430*3350 | ||
Weight | kg | 13000 |